GCC Code Coverage Report


Directory: ./
Coverage: low: ≥ 0% medium: ≥ 75.0% high: ≥ 90.0%
Coverage Exec / Excl / Total
Lines: 87.4% 132 / 0 / 151
Functions: 100.0% 2 / 0 / 2
Branches: 72.9% 218 / 0 / 299

src/energyplus/ForwardTranslator/ForwardTranslateSizingZone.cpp
Line Branch Exec Source
1 /***********************************************************************************************************************
2 * OpenStudio(R), Copyright (c) Alliance for Energy Innovation, LLC.
3 * See also https://openstudio.net/license
4 ***********************************************************************************************************************/
5
6 #include "../ForwardTranslator.hpp"
7 #include "../../model/Model.hpp"
8 #include "../../model/AirLoopHVAC.hpp"
9 #include "../../model/AirLoopHVAC_Impl.hpp"
10 #include "../../model/Space.hpp"
11 #include "../../model/Space_Impl.hpp"
12 #include "../../model/SizingZone.hpp"
13 #include "../../model/SizingZone_Impl.hpp"
14 #include "../../model/ControllerMechanicalVentilation.hpp"
15 #include "../../model/ControllerMechanicalVentilation_Impl.hpp"
16 #include "../../model/ControllerOutdoorAir.hpp"
17 #include "../../model/ControllerOutdoorAir_Impl.hpp"
18 #include "../../model/ThermalZone.hpp"
19 #include "../../model/ThermalZone_Impl.hpp"
20 #include "../../model/Schedule.hpp"
21
22 #include "../../utilities/core/Assert.hpp"
23 #include "../../utilities/core/Compare.hpp"
24 #include "../../utilities/core/Logger.hpp"
25 #include "../../utilities/idd/IddEnums.hpp"
26 #include "../../utilities/idf/IdfExtensibleGroup.hpp"
27
28 #include <utilities/idd/Sizing_Zone_FieldEnums.hxx>
29 #include <utilities/idd/DesignSpecification_ZoneAirDistribution_FieldEnums.hxx>
30 #include <utilities/idd/Controller_MechanicalVentilation_FieldEnums.hxx>
31 #include <utilities/idd/IddEnums.hxx>
32 #include <utilities/idd/IddFactory.hxx>
33
34 using namespace openstudio::model;
35
36 namespace openstudio {
37
38 namespace energyplus {
39
40 75 boost::optional<std::string> ForwardTranslator::zoneDSZADName(const ThermalZone& zone) {
41 // If any of the DSZAD fields is non-default, then it's worth it to translate it. Otherwise it has no effect.
42
1/1
✓ Branch 1 taken 75 times.
75 auto sizingZone = zone.sizingZone();
43
44 const bool isDSZADTranslated =
45
3/3
✓ Branch 1 taken 75 times.
✓ Branch 3 taken 50 times.
✓ Branch 4 taken 25 times.
125 !(sizingZone.isDesignZoneAirDistributionEffectivenessinCoolingModeDefaulted()
46
2/3
✓ Branch 1 taken 50 times.
✓ Branch 3 taken 50 times.
✗ Branch 4 not taken.
50 && sizingZone.isDesignZoneAirDistributionEffectivenessinHeatingModeDefaulted()
47
4/6
✓ Branch 1 taken 50 times.
✓ Branch 3 taken 50 times.
✗ Branch 4 not taken.
✓ Branch 6 taken 50 times.
✗ Branch 8 not taken.
✓ Branch 9 taken 50 times.
50 && sizingZone.isDesignZoneSecondaryRecirculationFractionDefaulted() && sizingZone.isDesignMinimumZoneVentilationEfficiencyDefaulted());
48
49
2/2
✓ Branch 0 taken 50 times.
✓ Branch 1 taken 25 times.
75 if (!isDSZADTranslated) {
50 50 return boost::none;
51 }
52
53
3/3
✓ Branch 1 taken 25 times.
✓ Branch 4 taken 25 times.
✓ Branch 7 taken 25 times.
25 return zone.nameString() + " Design Spec Zone Air Dist";
54 75 }
55
56 56 boost::optional<IdfObject> ForwardTranslator::translateSizingZone(SizingZone& modelObject) {
57 56 boost::optional<std::string> s;
58 56 boost::optional<double> value;
59
60 // ZoneorZoneListName
61
1/1
✓ Branch 1 taken 56 times.
56 model::ThermalZone thermalZone = modelObject.thermalZone();
62
1/1
✓ Branch 1 taken 56 times.
56 boost::optional<IdfObject> _thermalZone = translateAndMapModelObject(thermalZone);
63
1/2
✗ Branch 1 not taken.
✓ Branch 2 taken 56 times.
56 if (!_thermalZone) {
64 // This shouldn't even happen, but in any case, there's no point translating a Sizing:Zone for no Zone...
65 ✗ return boost::none;
66 }
67
68
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 IdfObject idfObject(IddObjectType::Sizing_Zone);
69
1/1
✓ Branch 1 taken 56 times.
56 m_idfObjects.push_back(idfObject);
70
71
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 std::string name = _thermalZone->nameString();
72
1/1
✓ Branch 1 taken 56 times.
56 { idfObject.setString(Sizing_ZoneFields::ZoneorZoneListName, name); }
73
74 // ZoneCoolingDesignSupplyAirTemperatureInputMethod
75 {
76
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 s = modelObject.zoneCoolingDesignSupplyAirTemperatureInputMethod();
77
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::ZoneCoolingDesignSupplyAirTemperatureInputMethod, s.get());
78 }
79
80 // ZoneCoolingDesignSupplyAirTemperature
81
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.zoneCoolingDesignSupplyAirTemperature();
82
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
83
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::ZoneCoolingDesignSupplyAirTemperature, value.get());
84 }
85
86 // zoneCoolingDesignSupplyAirTemperatureDifference
87
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.zoneCoolingDesignSupplyAirTemperatureDifference();
88
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
89
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::ZoneCoolingDesignSupplyAirTemperatureDifference, value.get());
90 }
91
92 // ZoneHeatingDesignSupplyAirTemperatureInputMethod
93 {
94
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 s = modelObject.zoneHeatingDesignSupplyAirTemperatureInputMethod();
95
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::ZoneHeatingDesignSupplyAirTemperatureInputMethod, s.get());
96 }
97
98 // ZoneHeatingDesignSupplyAirTemperature
99
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.zoneHeatingDesignSupplyAirTemperature();
100
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
101
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::ZoneHeatingDesignSupplyAirTemperature, value.get());
102 }
103
104 // ZoneHeatingDesignSupplyAirTemperatureDifference
105
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.zoneHeatingDesignSupplyAirTemperatureDifference();
106
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
107
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::ZoneHeatingDesignSupplyAirTemperatureDifference, value.get());
108 }
109
110 // ZoneCoolingDesignSupplyAirHumidityRatio
111
112
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.zoneCoolingDesignSupplyAirHumidityRatio();
113
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
114
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::ZoneCoolingDesignSupplyAirHumidityRatio, value.get());
115 }
116
117 // ZoneHeatingDesignSupplyAirHumidityRatio
118
119
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.zoneHeatingDesignSupplyAirHumidityRatio();
120
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
121
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::ZoneHeatingDesignSupplyAirHumidityRatio, value.get());
122 }
123
124 // ((DesignSpecificationOutdoorAirObjectName)(Design Specification Outdoor Air Object Name))
125
126 // ZoneHeatingSizingFactor
127
128
1/1
✓ Branch 1 taken 56 times.
56 value = modelObject.zoneHeatingSizingFactor();
129
1/2
✗ Branch 0 not taken.
✓ Branch 1 taken 56 times.
56 if (value) {
130 ✗ idfObject.setDouble(Sizing_ZoneFields::ZoneHeatingSizingFactor, value.get());
131 }
132
133 // ZoneCoolingSizingFactor
134
135
1/1
✓ Branch 1 taken 56 times.
56 value = modelObject.zoneCoolingSizingFactor();
136
1/2
✗ Branch 0 not taken.
✓ Branch 1 taken 56 times.
56 if (value) {
137 ✗ idfObject.setDouble(Sizing_ZoneFields::ZoneCoolingSizingFactor, value.get());
138 }
139
140 // CoolingDesignAirFlowMethod
141
142
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 s = modelObject.coolingDesignAirFlowMethod();
143
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (s) {
144
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::CoolingDesignAirFlowMethod, s.get());
145 }
146
147 // CoolingDesignAirFlowRate
148
149
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.coolingDesignAirFlowRate();
150
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
151
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::CoolingDesignAirFlowRate, value.get());
152 }
153
154 // CoolingMinimumAirFlowperZoneFloorArea
155
156
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.coolingMinimumAirFlowperZoneFloorArea();
157
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
158
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::CoolingMinimumAirFlowperZoneFloorArea, value.get());
159 }
160
161 // CoolingMinimumAirFlow
162
163
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.coolingMinimumAirFlow();
164
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
165
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::CoolingMinimumAirFlow, value.get());
166 }
167
168 // CoolingMinimumAirFlowFraction
169
170
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.coolingMinimumAirFlowFraction();
171
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
172
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::CoolingMinimumAirFlowFraction, value.get());
173 }
174
175 // HeatingDesignAirFlowMethod
176
177
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 s = modelObject.heatingDesignAirFlowMethod();
178
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (s) {
179
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::HeatingDesignAirFlowMethod, s.get());
180 }
181
182 // HeatingDesignAirFlowRate
183
184
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.heatingDesignAirFlowRate();
185
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
186
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::HeatingDesignAirFlowRate, value.get());
187 }
188
189 // HeatingMaximumAirFlowperZoneFloorArea
190
191
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.heatingMaximumAirFlowperZoneFloorArea();
192
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
193
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::HeatingMaximumAirFlowperZoneFloorArea, value.get());
194 }
195
196 // HeatingMaximumAirFlow
197
198
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.heatingMaximumAirFlow();
199
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
200
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::HeatingMaximumAirFlow, value.get());
201 }
202
203 // HeatingMaximumAirFlowFraction
204
205
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.heatingMaximumAirFlowFraction();
206
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
207
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::HeatingMaximumAirFlowFraction, value.get());
208 }
209
210 // These fields are onto OS:Sizing:Zone but they are on DesignSpecification:ZoneAirDistribution in E+:
211 // * Design Zone Air Distribution Effectiveness in Cooling Mode
212 // * Design Zone Air Distribution Effectiveness in Heating Mode
213 // * Design Zone Secondary Recirculation Fraction
214 // * Design Minimum Zone Ventilation Efficiency
215 // If any of the DSZAD fields is non-default, then it's worth it to translate it. Otherwise it has no effect.
216
3/3
✓ Branch 1 taken 56 times.
✓ Branch 3 taken 15 times.
✓ Branch 4 taken 41 times.
112 if (auto dSZADName_ = zoneDSZADName(thermalZone)) {
217
2/2
✓ Branch 1 taken 15 times.
✓ Branch 4 taken 15 times.
15 IdfObject dSZAD(IddObjectType::DesignSpecification_ZoneAirDistribution);
218
219
2/2
✓ Branch 1 taken 15 times.
✓ Branch 4 taken 15 times.
15 dSZAD.setName(*dSZADName_);
220
221 // register the DSZAD
222
1/1
✓ Branch 1 taken 15 times.
15 m_idfObjects.push_back(dSZAD);
223
224 // Only translate the non-defaulted fields
225
2/3
✓ Branch 1 taken 15 times.
✓ Branch 3 taken 15 times.
✗ Branch 4 not taken.
15 if (!modelObject.isDesignZoneAirDistributionEffectivenessinCoolingModeDefaulted()) {
226
2/2
✓ Branch 1 taken 15 times.
✓ Branch 4 taken 15 times.
15 dSZAD.setDouble(DesignSpecification_ZoneAirDistributionFields::ZoneAirDistributionEffectivenessinCoolingMode,
227 modelObject.designZoneAirDistributionEffectivenessinCoolingMode());
228 }
229
230
3/3
✓ Branch 1 taken 15 times.
✓ Branch 3 taken 14 times.
✓ Branch 4 taken 1 time.
15 if (!modelObject.isDesignZoneAirDistributionEffectivenessinHeatingModeDefaulted()) {
231
2/2
✓ Branch 1 taken 14 times.
✓ Branch 4 taken 14 times.
14 dSZAD.setDouble(DesignSpecification_ZoneAirDistributionFields::ZoneAirDistributionEffectivenessinHeatingMode,
232 modelObject.designZoneAirDistributionEffectivenessinHeatingMode());
233 }
234
235
3/3
✓ Branch 1 taken 15 times.
✓ Branch 3 taken 4 times.
✓ Branch 4 taken 11 times.
15 if (!modelObject.isDesignZoneSecondaryRecirculationFractionDefaulted()) {
236
2/2
✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
4 dSZAD.setDouble(DesignSpecification_ZoneAirDistributionFields::ZoneSecondaryRecirculationFraction,
237 modelObject.designZoneSecondaryRecirculationFraction());
238 }
239
240
3/3
✓ Branch 1 taken 15 times.
✓ Branch 3 taken 4 times.
✓ Branch 4 taken 11 times.
15 if (!modelObject.isDesignMinimumZoneVentilationEfficiencyDefaulted()) {
241
2/2
✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
4 dSZAD.setDouble(DesignSpecification_ZoneAirDistributionFields::MinimumZoneVentilationEfficiency,
242 modelObject.designMinimumZoneVentilationEfficiency());
243 }
244
245
3/3
✓ Branch 1 taken 15 times.
✓ Branch 4 taken 15 times.
✓ Branch 7 taken 15 times.
15 idfObject.setString(Sizing_ZoneFields::DesignSpecificationZoneAirDistributionObjectName, dSZAD.name().get());
246 71 }
247
248
2/3
✓ Branch 1 taken 56 times.
✗ Branch 3 not taken.
✓ Branch 4 taken 56 times.
56 if (modelObject.accountforDedicatedOutdoorAirSystem()) {
249 ✗ idfObject.setString(Sizing_ZoneFields::AccountforDedicatedOutdoorAirSystem, "Yes");
250
251 {
252 ✗ auto value = modelObject.dedicatedOutdoorAirSystemControlStrategy();
253 ✗ idfObject.setString(Sizing_ZoneFields::DedicatedOutdoorAirSystemControlStrategy, value);
254 ✗ }
255
256 {
257 ✗ if (modelObject.isDedicatedOutdoorAirLowSetpointTemperatureforDesignAutosized()) {
258 ✗ idfObject.setString(Sizing_ZoneFields::DedicatedOutdoorAirLowSetpointTemperatureforDesign, "Autosize");
259 ✗ } else if (auto value = modelObject.dedicatedOutdoorAirLowSetpointTemperatureforDesign()) {
260 ✗ idfObject.setDouble(Sizing_ZoneFields::DedicatedOutdoorAirLowSetpointTemperatureforDesign, value.get());
261 }
262 }
263
264 {
265 ✗ if (modelObject.isDedicatedOutdoorAirHighSetpointTemperatureforDesignAutosized()) {
266 ✗ idfObject.setString(Sizing_ZoneFields::DedicatedOutdoorAirHighSetpointTemperatureforDesign, "Autosize");
267 ✗ } else if (auto value = modelObject.dedicatedOutdoorAirHighSetpointTemperatureforDesign()) {
268 ✗ idfObject.setDouble(Sizing_ZoneFields::DedicatedOutdoorAirHighSetpointTemperatureforDesign, value.get());
269 }
270 }
271 } else {
272
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
112 idfObject.setString(Sizing_ZoneFields::AccountforDedicatedOutdoorAirSystem, "No");
273 }
274
275 // Zone Load Sizing Method: Optional String
276
1/1
✓ Branch 1 taken 56 times.
56 std::string zoneLoadSizingMethod = modelObject.zoneLoadSizingMethod();
277
1/1
✓ Branch 1 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::ZoneLoadSizingMethod, zoneLoadSizingMethod);
278
279 // Zone Latent Cooling Design Supply Air Humidity Ratio Input Method: Optional String
280
1/1
✓ Branch 1 taken 56 times.
56 std::string zoneLatentCoolingDesignSupplyAirHumidityRatioInputMethod = modelObject.zoneLatentCoolingDesignSupplyAirHumidityRatioInputMethod();
281
1/1
✓ Branch 1 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::ZoneLatentCoolingDesignSupplyAirHumidityRatioInputMethod,
282 zoneLatentCoolingDesignSupplyAirHumidityRatioInputMethod);
283
4/4
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
✓ Branch 7 taken 1 time.
✓ Branch 8 taken 55 times.
112 if (openstudio::istringEqual(zoneLatentCoolingDesignSupplyAirHumidityRatioInputMethod, "SupplyAirHumidityRatio")) {
284
285 // Zone Dehumidification Design Supply Air Humidity Ratio: boost::optional<double>
286 1 if (boost::optional<double> _zoneDehumidificationDesignSupplyAirHumidityRatio =
287
2/3
✓ Branch 1 taken 1 time.
✓ Branch 3 taken 1 time.
✗ Branch 4 not taken.
2 modelObject.zoneDehumidificationDesignSupplyAirHumidityRatio()) {
288 1 idfObject.setDouble(Sizing_ZoneFields::ZoneDehumidificationDesignSupplyAirHumidityRatio,
289
2/2
✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
1 _zoneDehumidificationDesignSupplyAirHumidityRatio.get());
290 } else {
291 ✗ LOG(Error, "For " << modelObject.briefDescription()
292 << ", when 'Zone Latent Cooling Design Supply Air Humidity Ratio Input Method' is 'SupplyAirHumidityRatio', you must enter "
293 "a 'Zone Dehumidification Design Supply Air Humidity Ratio'.");
294 }
295
3/4
✓ Branch 1 taken 55 times.
✓ Branch 4 taken 55 times.
✓ Branch 7 taken 55 times.
✗ Branch 8 not taken.
110 } else if (openstudio::istringEqual(zoneLatentCoolingDesignSupplyAirHumidityRatioInputMethod, "HumidityRatioDifference")) {
296 // Zone Cooling Design Supply Air Humidity Ratio Difference: Optional Double
297
1/1
✓ Branch 1 taken 55 times.
55 double zoneCoolingDesignSupplyAirHumidityRatioDifference = modelObject.zoneCoolingDesignSupplyAirHumidityRatioDifference();
298
1/1
✓ Branch 1 taken 55 times.
55 idfObject.setDouble(Sizing_ZoneFields::ZoneCoolingDesignSupplyAirHumidityRatioDifference, zoneCoolingDesignSupplyAirHumidityRatioDifference);
299 } else {
300 ✗ OS_ASSERT(false);
301 }
302
303 // Zone Latent Heating Design Supply Air Humidity Ratio Input Method: Optional String
304
1/1
✓ Branch 1 taken 56 times.
56 std::string zoneLatentHeatingDesignSupplyAirHumidityRatioInputMethod = modelObject.zoneLatentHeatingDesignSupplyAirHumidityRatioInputMethod();
305
1/1
✓ Branch 1 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::ZoneLatentHeatingDesignSupplyAirHumidityRatioInputMethod,
306 zoneLatentHeatingDesignSupplyAirHumidityRatioInputMethod);
307
308
4/4
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
✓ Branch 7 taken 1 time.
✓ Branch 8 taken 55 times.
112 if (openstudio::istringEqual(zoneLatentHeatingDesignSupplyAirHumidityRatioInputMethod, "SupplyAirHumidityRatio")) {
309
310 // Zone Humidification Design Supply Air Humidity Ratio: boost::optional<double>
311
2/3
✓ Branch 1 taken 1 time.
✓ Branch 3 taken 1 time.
✗ Branch 4 not taken.
2 if (boost::optional<double> d_ = modelObject.zoneHumidificationDesignSupplyAirHumidityRatio()) {
312
2/2
✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
1 idfObject.setDouble(Sizing_ZoneFields::ZoneHumidificationDesignSupplyAirHumidityRatio, d_.get());
313 } else {
314 ✗ LOG(Error, "For " << modelObject.briefDescription()
315 << ", when 'Zone Latent Heating Design Supply Air Humidity Ratio Input Method' is 'SupplyAirHumidityRatio', you must enter "
316 "a 'Zone Dehumidification Design Supply Air Humidity Ratio'.");
317 }
318
3/4
✓ Branch 1 taken 55 times.
✓ Branch 4 taken 55 times.
✓ Branch 7 taken 55 times.
✗ Branch 8 not taken.
110 } else if (openstudio::istringEqual(zoneLatentHeatingDesignSupplyAirHumidityRatioInputMethod, "HumidityRatioDifference")) {
319 // Zone Humidification Design Supply Air Humidity Ratio Difference: Optional Double
320
2/2
✓ Branch 1 taken 55 times.
✓ Branch 4 taken 55 times.
55 idfObject.setDouble(Sizing_ZoneFields::ZoneHumidificationDesignSupplyAirHumidityRatioDifference,
321 modelObject.zoneHumidificationDesignSupplyAirHumidityRatioDifference());
322 } else {
323 ✗ OS_ASSERT(false);
324 }
325
326
4/4
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
✓ Branch 7 taken 2 times.
✓ Branch 8 taken 54 times.
112 if (!openstudio::istringEqual(zoneLoadSizingMethod, "Sensible Load Only No Latent Load")) {
327 // Zone Humidistat Dehumidification Set Point Schedule Name
328
2/3
✓ Branch 1 taken 2 times.
✓ Branch 3 taken 2 times.
✗ Branch 4 not taken.
4 if (boost::optional<Schedule> sch_ = modelObject.zoneHumidistatDehumidificationSetPointSchedule()) {
329
3/4
✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 6 taken 2 times.
✗ Branch 7 not taken.
4 if (auto idf_sch_ = translateAndMapModelObject(sch_.get())) {
330
3/3
✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
2 idfObject.setString(Sizing_ZoneFields::ZoneHumidistatDehumidificationSetPointScheduleName, idf_sch_->nameString());
331 2 }
332 2 }
333
334 // Zone Humidistat Humidification Set Point Schedule Name
335
2/3
✓ Branch 1 taken 2 times.
✓ Branch 3 taken 2 times.
✗ Branch 4 not taken.
4 if (boost::optional<Schedule> sch_ = modelObject.zoneHumidistatHumidificationSetPointSchedule()) {
336
3/4
✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 6 taken 2 times.
✗ Branch 7 not taken.
4 if (auto idf_sch_ = translateAndMapModelObject(sch_.get())) {
337
338
3/3
✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
2 idfObject.setString(Sizing_ZoneFields::ZoneHumidistatHumidificationSetPointScheduleName, idf_sch_->nameString());
339 2 }
340 2 }
341 }
342
343 // Type of Space Sum to Use
344
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 s = modelObject.sizingOption();
345
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (s) {
346
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::TypeofSpaceSumtoUse, s.get());
347 }
348
349 // Heating Coil Sizing Method
350
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 s = modelObject.heatingCoilSizingMethod();
351
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (s) {
352
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setString(Sizing_ZoneFields::HeatingCoilSizingMethod, s.get());
353 }
354
355 // Maximum Heating Capacity To Cooling Load Sizing Ratio
356
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 value = modelObject.maximumHeatingCapacityToCoolingLoadSizingRatio();
357
1/2
✓ Branch 0 taken 56 times.
✗ Branch 1 not taken.
56 if (value) {
358
2/2
✓ Branch 1 taken 56 times.
✓ Branch 4 taken 56 times.
56 idfObject.setDouble(Sizing_ZoneFields::MaximumHeatingCapacityToCoolingLoadSizingRatio, value.get());
359 }
360
361
1/1
✓ Branch 1 taken 56 times.
56 return idfObject;
362 56 }
363
364 } // namespace energyplus
365
366 } // namespace openstudio
367