src/model/HVACTemplates.cpp
| Line | Branch | Exec | Source |
|---|---|---|---|
| 1 | /*********************************************************************************************************************** | ||
| 2 | * OpenStudio(R), Copyright (c) Alliance for Energy Innovation, LLC. | ||
| 3 | * See also https://openstudio.net/license | ||
| 4 | ***********************************************************************************************************************/ | ||
| 5 | |||
| 6 | #include "HVACTemplates.hpp" | ||
| 7 | #include "Model.hpp" | ||
| 8 | #include "PipeAdiabatic.hpp" | ||
| 9 | #include "AirLoopHVAC.hpp" | ||
| 10 | #include "AirLoopHVAC_Impl.hpp" | ||
| 11 | #include "ChillerElectricEIR.hpp" | ||
| 12 | #include "ChillerElectricEIR_Impl.hpp" | ||
| 13 | #include "ThermalZone.hpp" | ||
| 14 | #include "ThermalZone_Impl.hpp" | ||
| 15 | #include "ZoneHVACPackagedTerminalHeatPump.hpp" | ||
| 16 | #include "ZoneHVACPackagedTerminalHeatPump_Impl.hpp" | ||
| 17 | #include "ZoneHVACPackagedTerminalAirConditioner.hpp" | ||
| 18 | #include "ZoneHVACPackagedTerminalAirConditioner_Impl.hpp" | ||
| 19 | #include "BoilerHotWater.hpp" | ||
| 20 | #include "BoilerHotWater_Impl.hpp" | ||
| 21 | #include "WaterHeaterMixed.hpp" | ||
| 22 | #include "WaterHeaterMixed_Impl.hpp" | ||
| 23 | #include "PumpVariableSpeed.hpp" | ||
| 24 | #include "PumpVariableSpeed_Impl.hpp" | ||
| 25 | #include "PlantLoop.hpp" | ||
| 26 | #include "PlantLoop_Impl.hpp" | ||
| 27 | #include "SizingPlant.hpp" | ||
| 28 | #include "SizingPlant_Impl.hpp" | ||
| 29 | #include "CoilCoolingDXSingleSpeed.hpp" | ||
| 30 | #include "CoilCoolingDXSingleSpeed_Impl.hpp" | ||
| 31 | #include "CoilCoolingDXTwoSpeed.hpp" | ||
| 32 | #include "CoilCoolingDXTwoSpeed_Impl.hpp" | ||
| 33 | #include "CurveCubic.hpp" | ||
| 34 | #include "CurveCubic_Impl.hpp" | ||
| 35 | #include "CurveQuadratic.hpp" | ||
| 36 | #include "CurveQuadratic_Impl.hpp" | ||
| 37 | #include "CurveBiquadratic.hpp" | ||
| 38 | #include "CurveBiquadratic_Impl.hpp" | ||
| 39 | #include "CoilHeatingGas.hpp" | ||
| 40 | #include "CoilHeatingGas_Impl.hpp" | ||
| 41 | #include "CoilHeatingElectric.hpp" | ||
| 42 | #include "CoilHeatingElectric_Impl.hpp" | ||
| 43 | #include "CoilHeatingDXSingleSpeed.hpp" | ||
| 44 | #include "CoilHeatingDXSingleSpeed_Impl.hpp" | ||
| 45 | #include "ScheduleRuleset.hpp" | ||
| 46 | #include "ScheduleRuleset_Impl.hpp" | ||
| 47 | #include "ScheduleDay.hpp" | ||
| 48 | #include "ScheduleDay_Impl.hpp" | ||
| 49 | #include "FanConstantVolume.hpp" | ||
| 50 | #include "FanConstantVolume_Impl.hpp" | ||
| 51 | #include "FanVariableVolume.hpp" | ||
| 52 | #include "FanVariableVolume_Impl.hpp" | ||
| 53 | #include "SetpointManagerMixedAir.hpp" | ||
| 54 | #include "SetpointManagerMixedAir_Impl.hpp" | ||
| 55 | #include "SetpointManagerSingleZoneReheat.hpp" | ||
| 56 | #include "SetpointManagerSingleZoneReheat_Impl.hpp" | ||
| 57 | #include "SetpointManagerScheduled.hpp" | ||
| 58 | #include "SetpointManagerScheduled_Impl.hpp" | ||
| 59 | #include "SetpointManagerFollowOutdoorAirTemperature.hpp" | ||
| 60 | #include "SetpointManagerFollowOutdoorAirTemperature_Impl.hpp" | ||
| 61 | #include "SizingSystem.hpp" | ||
| 62 | #include "SizingSystem_Impl.hpp" | ||
| 63 | #include "Node.hpp" | ||
| 64 | #include "Node_Impl.hpp" | ||
| 65 | #include "AirLoopHVACOutdoorAirSystem.hpp" | ||
| 66 | #include "AirLoopHVACOutdoorAirSystem_Impl.hpp" | ||
| 67 | #include "AirLoopHVACUnitaryHeatPumpAirToAir.hpp" | ||
| 68 | #include "AirLoopHVACUnitaryHeatPumpAirToAir_Impl.hpp" | ||
| 69 | #include "AirTerminalSingleDuctParallelPIUReheat.hpp" | ||
| 70 | #include "AirTerminalSingleDuctParallelPIUReheat_Impl.hpp" | ||
| 71 | #include "AirTerminalSingleDuctConstantVolumeNoReheat.hpp" | ||
| 72 | #include "AirTerminalSingleDuctConstantVolumeNoReheat_Impl.hpp" | ||
| 73 | #include "AirTerminalSingleDuctVAVReheat.hpp" | ||
| 74 | #include "AirTerminalSingleDuctVAVReheat_Impl.hpp" | ||
| 75 | #include "ControllerOutdoorAir.hpp" | ||
| 76 | #include "ControllerOutdoorAir_Impl.hpp" | ||
| 77 | #include "CoilCoolingWater.hpp" | ||
| 78 | #include "CoilCoolingWater_Impl.hpp" | ||
| 79 | #include "CoilHeatingWater.hpp" | ||
| 80 | #include "CoilHeatingWater_Impl.hpp" | ||
| 81 | #include "Splitter.hpp" | ||
| 82 | #include "Splitter_Impl.hpp" | ||
| 83 | #include "Mixer.hpp" | ||
| 84 | #include "Mixer_Impl.hpp" | ||
| 85 | #include "CoolingTowerSingleSpeed.hpp" | ||
| 86 | #include "CoolingTowerSingleSpeed_Impl.hpp" | ||
| 87 | #include "PumpConstantSpeed.hpp" | ||
| 88 | #include "WaterUseEquipmentDefinition.hpp" | ||
| 89 | #include "WaterUseEquipment.hpp" | ||
| 90 | #include "WaterUseConnections.hpp" | ||
| 91 | |||
| 92 | #include "../utilities/time/Time.hpp" | ||
| 93 | |||
| 94 | namespace openstudio { | ||
| 95 | |||
| 96 | namespace model { | ||
| 97 | |||
| 98 | 13 | Schedule makeSchedule(Model& model, const std::string& name = "Hot_Water_Temperature", double targetTemperature = 67.0) { | |
| 99 | //Make a time stamp to use in multiple places | ||
| 100 |
1/1✓ Branch 1 taken 13 times.
|
13 | Time osTime = Time(0, 24, 0, 0); |
| 101 | |||
| 102 | //Schedule Ruleset | ||
| 103 |
1/1✓ Branch 1 taken 13 times.
|
13 | ScheduleRuleset tempSchedule = ScheduleRuleset(model); |
| 104 |
1/1✓ Branch 1 taken 13 times.
|
13 | tempSchedule.setName(name); |
| 105 | |||
| 106 | //Winter Design Day | ||
| 107 |
1/1✓ Branch 1 taken 13 times.
|
13 | ScheduleDay tempScheduleWinter = ScheduleDay(model); |
| 108 |
1/1✓ Branch 1 taken 13 times.
|
13 | tempSchedule.setWinterDesignDaySchedule(tempScheduleWinter); |
| 109 |
3/3✓ Branch 1 taken 13 times.
✓ Branch 4 taken 13 times.
✓ Branch 7 taken 13 times.
|
13 | tempSchedule.winterDesignDaySchedule().setName(name + "_Winter_Design_Day"); |
| 110 |
2/2✓ Branch 1 taken 13 times.
✓ Branch 4 taken 13 times.
|
13 | tempSchedule.winterDesignDaySchedule().addValue(osTime, targetTemperature); |
| 111 | |||
| 112 | //Summer Design Day | ||
| 113 |
1/1✓ Branch 1 taken 13 times.
|
13 | ScheduleDay tempScheduleSummer = ScheduleDay(model); |
| 114 |
1/1✓ Branch 1 taken 13 times.
|
13 | tempSchedule.setSummerDesignDaySchedule(tempScheduleSummer); |
| 115 |
3/3✓ Branch 1 taken 13 times.
✓ Branch 4 taken 13 times.
✓ Branch 7 taken 13 times.
|
13 | tempSchedule.summerDesignDaySchedule().setName(name + "_Summer_Design_Day"); |
| 116 |
2/2✓ Branch 1 taken 13 times.
✓ Branch 4 taken 13 times.
|
13 | tempSchedule.summerDesignDaySchedule().addValue(osTime, targetTemperature); |
| 117 | |||
| 118 | //All other days | ||
| 119 |
3/3✓ Branch 1 taken 13 times.
✓ Branch 4 taken 13 times.
✓ Branch 7 taken 13 times.
|
13 | tempSchedule.defaultDaySchedule().setName(name + "_Default"); |
| 120 |
2/2✓ Branch 1 taken 13 times.
✓ Branch 4 taken 13 times.
|
13 | tempSchedule.defaultDaySchedule().addValue(osTime, targetTemperature); |
| 121 | |||
| 122 | 26 | return std::move(tempSchedule); | |
| 123 | 13 | } | |
| 124 | |||
| 125 | 3 | Schedule deckTempSchedule(Model& model) { | |
| 126 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
6 | return makeSchedule(model, "Deck_Temperature", 12.8); |
| 127 | } | ||
| 128 | |||
| 129 | 7 | Schedule hotWaterTempSchedule(Model& model) { | |
| 130 |
2/2✓ Branch 1 taken 7 times.
✓ Branch 4 taken 7 times.
|
14 | return makeSchedule(model, "Hot_Water_Temperature", 67.0); |
| 131 | } | ||
| 132 | |||
| 133 | 3 | Schedule chilledWaterTempSchedule(Model& model) { | |
| 134 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
6 | return makeSchedule(model, "Chilled_Water_Temperature", 6.7); |
| 135 | } | ||
| 136 | |||
| 137 | 4 | ZoneHVACPackagedTerminalAirConditioner addSystemType1(Model& model) { | |
| 138 |
1/1✓ Branch 1 taken 4 times.
|
4 | Model tempModel; |
| 139 |
1/1✓ Branch 1 taken 4 times.
|
4 | Schedule availabilitySchedule = model.alwaysOnDiscreteSchedule(); |
| 140 | |||
| 141 |
1/1✓ Branch 1 taken 4 times.
|
4 | model::FanConstantVolume fan(model, availabilitySchedule); |
| 142 |
1/1✓ Branch 1 taken 4 times.
|
4 | fan.setPressureRise(500); |
| 143 | |||
| 144 |
1/1✓ Branch 1 taken 4 times.
|
4 | model::CoilHeatingWater heatingCoil(model, availabilitySchedule); |
| 145 | |||
| 146 |
1/1✓ Branch 1 taken 4 times.
|
4 | CoilCoolingDXSingleSpeed coolingCoil = CoilCoolingDXSingleSpeed(model); |
| 147 | |||
| 148 |
1/1✓ Branch 1 taken 4 times.
|
4 | model::ZoneHVACPackagedTerminalAirConditioner ptac(model, availabilitySchedule, fan, heatingCoil, coolingCoil); |
| 149 | |||
| 150 | 8 | return ptac; | |
| 151 | 4 | } | |
| 152 | |||
| 153 | 4 | void addSystemType1(Model& model, std::vector<ThermalZone> zones) { | |
| 154 | |||
| 155 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 13 taken 4 times.
✓ Branch 17 taken 4 times.
|
8 | zones.erase(std::remove_if(zones.begin(), zones.end(), [&](const auto& zone) { return zone.model() != model; }), zones.end()); |
| 156 | |||
| 157 | // Hot Water Plant | ||
| 158 | |||
| 159 |
1/2✓ Branch 1 taken 4 times.
✗ Branch 2 not taken.
|
4 | if (!zones.empty()) { |
| 160 |
1/1✓ Branch 1 taken 4 times.
|
4 | PlantLoop hotWaterPlant(model); |
| 161 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | hotWaterPlant.setName("Hot Water Loop"); |
| 162 |
1/1✓ Branch 1 taken 4 times.
|
4 | SizingPlant sizingPlant = hotWaterPlant.sizingPlant(); |
| 163 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | sizingPlant.setLoopType("Heating"); |
| 164 |
1/1✓ Branch 1 taken 4 times.
|
4 | sizingPlant.setDesignLoopExitTemperature(82.0); |
| 165 |
1/1✓ Branch 1 taken 4 times.
|
4 | sizingPlant.setLoopDesignTemperatureDifference(11.0); |
| 166 | |||
| 167 |
1/1✓ Branch 1 taken 4 times.
|
4 | Node hotWaterOutletNode = hotWaterPlant.supplyOutletNode(); |
| 168 |
1/1✓ Branch 1 taken 4 times.
|
4 | Node hotWaterInletNode = hotWaterPlant.supplyInletNode(); |
| 169 | |||
| 170 |
1/1✓ Branch 1 taken 4 times.
|
4 | PumpVariableSpeed pump = PumpVariableSpeed(model); |
| 171 | |||
| 172 |
1/1✓ Branch 1 taken 4 times.
|
4 | BoilerHotWater boiler = BoilerHotWater(model); |
| 173 | |||
| 174 |
1/1✓ Branch 1 taken 4 times.
|
4 | CurveBiquadratic boilerCurve(model); |
| 175 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | boilerCurve.setName("Boiler Efficiency"); |
| 176 |
1/1✓ Branch 1 taken 4 times.
|
4 | boilerCurve.setCoefficient1Constant(1.0); |
| 177 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | boilerCurve.setInputUnitTypeforX("Dimensionless"); |
| 178 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | boilerCurve.setInputUnitTypeforY("Dimensionless"); |
| 179 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | boilerCurve.setOutputUnitType("Dimensionless"); |
| 180 | |||
| 181 |
1/1✓ Branch 1 taken 4 times.
|
4 | boiler.setNormalizedBoilerEfficiencyCurve(boilerCurve); |
| 182 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | boiler.setEfficiencyCurveTemperatureEvaluationVariable("LeavingBoiler"); |
| 183 | |||
| 184 |
1/1✓ Branch 1 taken 4 times.
|
4 | pump.addToNode(hotWaterInletNode); |
| 185 | |||
| 186 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | Node node = hotWaterPlant.supplySplitter().lastOutletModelObject()->cast<Node>(); |
| 187 |
1/1✓ Branch 1 taken 4 times.
|
4 | boiler.addToNode(node); |
| 188 | |||
| 189 |
1/1✓ Branch 1 taken 4 times.
|
4 | PipeAdiabatic pipe(model); |
| 190 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | hotWaterPlant.addSupplyBranchForComponent(pipe); |
| 191 | |||
| 192 |
1/1✓ Branch 1 taken 4 times.
|
4 | PipeAdiabatic pipe2(model); |
| 193 |
1/1✓ Branch 1 taken 4 times.
|
4 | pipe2.addToNode(hotWaterOutletNode); |
| 194 | |||
| 195 |
1/1✓ Branch 1 taken 4 times.
|
4 | Schedule _hotWaterSchedule = hotWaterTempSchedule(model); |
| 196 | |||
| 197 |
1/1✓ Branch 1 taken 4 times.
|
4 | SetpointManagerScheduled hotWaterSPM(model, _hotWaterSchedule); |
| 198 | |||
| 199 |
1/1✓ Branch 1 taken 4 times.
|
4 | hotWaterSPM.addToNode(hotWaterOutletNode); |
| 200 | |||
| 201 |
2/2✓ Branch 5 taken 4 times.
✓ Branch 6 taken 4 times.
|
8 | for (auto& zone : zones) { |
| 202 |
1/1✓ Branch 1 taken 4 times.
|
4 | model::ZoneHVACPackagedTerminalAirConditioner ptac = addSystemType1(model); |
| 203 | |||
| 204 |
1/1✓ Branch 1 taken 4 times.
|
4 | ptac.addToThermalZone(zone); |
| 205 | |||
| 206 |
1/1✓ Branch 1 taken 4 times.
|
4 | HVACComponent comp = ptac.heatingCoil(); |
| 207 | |||
| 208 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | hotWaterPlant.addDemandBranchForComponent(comp); |
| 209 | 4 | } | |
| 210 | 4 | } | |
| 211 | 4 | } | |
| 212 | |||
| 213 | ✗ | ZoneHVACPackagedTerminalHeatPump addSystemType2(Model& model) { | |
| 214 | ✗ | Model tempModel; | |
| 215 | ✗ | Schedule availabilitySchedule = model.alwaysOnDiscreteSchedule(); | |
| 216 | |||
| 217 | ✗ | model::FanConstantVolume fan(model, availabilitySchedule); | |
| 218 | ✗ | fan.setPressureRise(300); | |
| 219 | |||
| 220 | ✗ | model::CoilHeatingElectric supplementalHeatingCoil(model); | |
| 221 | |||
| 222 | ✗ | CoilCoolingDXSingleSpeed coolingCoil = CoilCoolingDXSingleSpeed(model); | |
| 223 | |||
| 224 | ✗ | CoilHeatingDXSingleSpeed heatingCoil(model); | |
| 225 | |||
| 226 | ✗ | model::ZoneHVACPackagedTerminalHeatPump pthp(model, availabilitySchedule, fan, heatingCoil, coolingCoil, supplementalHeatingCoil); | |
| 227 | |||
| 228 | ✗ | return pthp; | |
| 229 | ✗ | } | |
| 230 | |||
| 231 | ✗ | void addSystemType2(Model& model, std::vector<ThermalZone> zones) { | |
| 232 | ✗ | for (auto& zone : zones) { | |
| 233 | ✗ | if (zone.model() == model) { | |
| 234 | ✗ | ZoneHVACPackagedTerminalHeatPump pthp = addSystemType2(model); | |
| 235 | |||
| 236 | ✗ | pthp.addToThermalZone(zone); | |
| 237 | ✗ | } | |
| 238 | } | ||
| 239 | ✗ | } | |
| 240 | |||
| 241 | 8 | Loop addSystemType3(Model& model) { | |
| 242 |
1/1✓ Branch 1 taken 8 times.
|
8 | Model tempModel; |
| 243 |
1/1✓ Branch 1 taken 8 times.
|
8 | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); |
| 244 | |||
| 245 |
1/1✓ Branch 1 taken 8 times.
|
8 | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); |
| 246 |
2/2✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
|
8 | airLoopHVAC.setName("Packaged Rooftop Air Conditioner"); |
| 247 | // when an airloophvac is contructed, its constructor automatically creates a sizing:system object | ||
| 248 | // the default sizing:system contstructor makes a system:sizing object appropriate for a multizone VAV system | ||
| 249 | // this systems is a constant volume system with no VAV terminals, and needs different default settings | ||
| 250 | |||
| 251 | // get the sizing:system object associated with the airloophvac | ||
| 252 |
1/1✓ Branch 1 taken 8 times.
|
8 | SizingSystem sizingSystem = airLoopHVAC.sizingSystem(); |
| 253 | |||
| 254 | //set the default parameters correctly for a constant volume system with no VAV terminals | ||
| 255 |
2/2✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
|
8 | sizingSystem.setTypeofLoadtoSizeOn("Sensible"); |
| 256 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.autosizeDesignOutdoorAirFlowRate(); |
| 257 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setCentralHeatingMaximumSystemAirFlowRatio(1.0); |
| 258 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setPreheatDesignTemperature(7.0); |
| 259 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setPreheatDesignHumidityRatio(0.008); |
| 260 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setPrecoolDesignTemperature(12.8); |
| 261 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setPrecoolDesignHumidityRatio(0.008); |
| 262 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setCentralCoolingDesignSupplyAirTemperature(12.8); |
| 263 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setCentralHeatingDesignSupplyAirTemperature(40.0); |
| 264 |
2/2✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
|
8 | sizingSystem.setSizingOption("NonCoincident"); |
| 265 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setAllOutdoorAirinCooling(false); |
| 266 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setAllOutdoorAirinHeating(false); |
| 267 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setCentralCoolingDesignSupplyAirHumidityRatio(0.0085); |
| 268 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setCentralHeatingDesignSupplyAirHumidityRatio(0.0080); |
| 269 |
2/2✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
|
8 | sizingSystem.setCoolingDesignAirFlowMethod("DesignDay"); |
| 270 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setCoolingDesignAirFlowRate(0.0); |
| 271 |
2/2✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
|
8 | sizingSystem.setHeatingDesignAirFlowMethod("DesignDay"); |
| 272 |
1/1✓ Branch 1 taken 8 times.
|
8 | sizingSystem.setHeatingDesignAirFlowRate(0.0); |
| 273 |
2/2✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
|
8 | sizingSystem.setSystemOutdoorAirMethod("ZoneSum"); |
| 274 | |||
| 275 |
1/1✓ Branch 1 taken 8 times.
|
8 | FanConstantVolume fan = FanConstantVolume(model); |
| 276 |
1/1✓ Branch 1 taken 8 times.
|
8 | fan.setPressureRise(500); |
| 277 | |||
| 278 |
1/1✓ Branch 1 taken 8 times.
|
8 | CoilHeatingGas coilHeatingGas = CoilHeatingGas(model, _alwaysOnSchedule); |
| 279 | |||
| 280 |
1/1✓ Branch 1 taken 8 times.
|
8 | CoilCoolingDXSingleSpeed coilCooling = CoilCoolingDXSingleSpeed(model); |
| 281 | |||
| 282 |
1/1✓ Branch 1 taken 8 times.
|
8 | SetpointManagerSingleZoneReheat setpointMSZR(model); |
| 283 | |||
| 284 |
1/1✓ Branch 1 taken 8 times.
|
8 | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); |
| 285 | |||
| 286 |
1/1✓ Branch 1 taken 8 times.
|
8 | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); |
| 287 | |||
| 288 |
1/1✓ Branch 1 taken 8 times.
|
8 | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); |
| 289 | |||
| 290 |
1/1✓ Branch 1 taken 8 times.
|
8 | outdoorAirSystem.addToNode(supplyOutletNode); |
| 291 |
1/1✓ Branch 1 taken 8 times.
|
8 | coilCooling.addToNode(supplyOutletNode); |
| 292 |
1/1✓ Branch 1 taken 8 times.
|
8 | coilHeatingGas.addToNode(supplyOutletNode); |
| 293 |
1/1✓ Branch 1 taken 8 times.
|
8 | fan.addToNode(supplyOutletNode); |
| 294 | |||
| 295 |
3/3✓ Branch 1 taken 8 times.
✓ Branch 4 taken 8 times.
✓ Branch 7 taken 8 times.
|
8 | Node node1 = fan.outletModelObject()->cast<Node>(); |
| 296 |
1/1✓ Branch 1 taken 8 times.
|
8 | setpointMSZR.addToNode(node1); |
| 297 | |||
| 298 |
1/1✓ Branch 1 taken 8 times.
|
8 | AirTerminalSingleDuctConstantVolumeNoReheat terminal(model, _alwaysOnSchedule); |
| 299 | |||
| 300 |
1/1✓ Branch 1 taken 8 times.
|
8 | airLoopHVAC.addBranchForHVACComponent(terminal); |
| 301 | |||
| 302 | 16 | return std::move(airLoopHVAC); | |
| 303 | 8 | } | |
| 304 | |||
| 305 | ✗ | Loop addSystemType4(Model& model) { | |
| 306 | ✗ | Model tempModel; | |
| 307 | |||
| 308 | ✗ | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); | |
| 309 | |||
| 310 | ✗ | AirLoopHVAC airLoopHVAC(model); | |
| 311 | ✗ | airLoopHVAC.setName("Packaged Rooftop Heat Pump"); | |
| 312 | // when an airloophvac is contructed, its constructor automatically creates a sizing:system object | ||
| 313 | // the default sizing:system contstructor makes a system:sizing object appropriate for a multizone VAV system | ||
| 314 | // this systems is a constant volume system with no VAV terminals, and needs different default settings | ||
| 315 | |||
| 316 | // get the sizing:system object associated with the airloophvac | ||
| 317 | ✗ | SizingSystem sizingSystem = airLoopHVAC.sizingSystem(); | |
| 318 | |||
| 319 | //set the default parameters correctly for a constant volume system with no VAV terminals | ||
| 320 | ✗ | sizingSystem.setTypeofLoadtoSizeOn("Sensible"); | |
| 321 | ✗ | sizingSystem.autosizeDesignOutdoorAirFlowRate(); | |
| 322 | ✗ | sizingSystem.setCentralHeatingMaximumSystemAirFlowRatio(1.0); | |
| 323 | ✗ | sizingSystem.setPreheatDesignTemperature(7.0); | |
| 324 | ✗ | sizingSystem.setPreheatDesignHumidityRatio(0.008); | |
| 325 | ✗ | sizingSystem.setPrecoolDesignTemperature(12.8); | |
| 326 | ✗ | sizingSystem.setPrecoolDesignHumidityRatio(0.008); | |
| 327 | ✗ | sizingSystem.setCentralCoolingDesignSupplyAirTemperature(12.8); | |
| 328 | ✗ | sizingSystem.setCentralHeatingDesignSupplyAirTemperature(40.0); | |
| 329 | ✗ | sizingSystem.setSizingOption("NonCoincident"); | |
| 330 | ✗ | sizingSystem.setAllOutdoorAirinCooling(false); | |
| 331 | ✗ | sizingSystem.setAllOutdoorAirinHeating(false); | |
| 332 | ✗ | sizingSystem.setCentralCoolingDesignSupplyAirHumidityRatio(0.0085); | |
| 333 | ✗ | sizingSystem.setCentralHeatingDesignSupplyAirHumidityRatio(0.0080); | |
| 334 | ✗ | sizingSystem.setCoolingDesignAirFlowMethod("DesignDay"); | |
| 335 | ✗ | sizingSystem.setCoolingDesignAirFlowRate(0.0); | |
| 336 | ✗ | sizingSystem.setHeatingDesignAirFlowMethod("DesignDay"); | |
| 337 | ✗ | sizingSystem.setHeatingDesignAirFlowRate(0.0); | |
| 338 | ✗ | sizingSystem.setSystemOutdoorAirMethod("ZoneSum"); | |
| 339 | |||
| 340 | ✗ | FanConstantVolume supplyFan(model, _alwaysOnSchedule); | |
| 341 | ✗ | supplyFan.setPressureRise(500); | |
| 342 | |||
| 343 | ✗ | CoilCoolingDXSingleSpeed coolingCoil = CoilCoolingDXSingleSpeed(model); | |
| 344 | |||
| 345 | ✗ | CoilHeatingDXSingleSpeed heatingCoil(model); | |
| 346 | |||
| 347 | ✗ | CoilHeatingElectric coilHeatingElectric = CoilHeatingElectric(model); | |
| 348 | |||
| 349 | ✗ | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); | |
| 350 | |||
| 351 | ✗ | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); | |
| 352 | |||
| 353 | ✗ | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); | |
| 354 | ✗ | outdoorAirSystem.addToNode(supplyOutletNode); | |
| 355 | ✗ | coolingCoil.addToNode(supplyOutletNode); | |
| 356 | ✗ | heatingCoil.addToNode(supplyOutletNode); | |
| 357 | ✗ | coilHeatingElectric.addToNode(supplyOutletNode); | |
| 358 | ✗ | supplyFan.addToNode(supplyOutletNode); | |
| 359 | |||
| 360 | ✗ | AirTerminalSingleDuctConstantVolumeNoReheat terminal(model, _alwaysOnSchedule); | |
| 361 | |||
| 362 | ✗ | airLoopHVAC.addBranchForHVACComponent(terminal); | |
| 363 | |||
| 364 | ✗ | SetpointManagerSingleZoneReheat setpointMSZR(model); | |
| 365 | |||
| 366 | ✗ | Node node1 = supplyFan.outletModelObject()->cast<Node>(); | |
| 367 | ✗ | setpointMSZR.addToNode(node1); | |
| 368 | |||
| 369 | ✗ | return std::move(airLoopHVAC); | |
| 370 | ✗ | } | |
| 371 | |||
| 372 | 2 | Loop addSystemType5(Model& model) { | |
| 373 |
1/1✓ Branch 1 taken 2 times.
|
2 | Model tempModel; |
| 374 | |||
| 375 |
1/1✓ Branch 1 taken 2 times.
|
2 | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); |
| 376 | |||
| 377 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | auto _deckTempSchedule = deckTempSchedule(tempModel).clone(model).cast<Schedule>(); |
| 378 | |||
| 379 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | auto _hotWaterSchedule = hotWaterTempSchedule(tempModel).clone(model).cast<Schedule>(); |
| 380 | |||
| 381 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | auto _chilledWaterSchedule = chilledWaterTempSchedule(tempModel).clone(model).cast<Schedule>(); |
| 382 | |||
| 383 |
1/1✓ Branch 1 taken 2 times.
|
2 | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); |
| 384 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | airLoopHVAC.setName("Packaged Rooftop VAV with Reheat"); |
| 385 |
1/1✓ Branch 1 taken 2 times.
|
2 | SizingSystem sizingSystem = airLoopHVAC.sizingSystem(); |
| 386 |
1/1✓ Branch 1 taken 2 times.
|
2 | sizingSystem.setCentralCoolingDesignSupplyAirTemperature(12.8); |
| 387 |
1/1✓ Branch 1 taken 2 times.
|
2 | sizingSystem.setCentralHeatingDesignSupplyAirTemperature(12.8); |
| 388 | |||
| 389 |
1/1✓ Branch 1 taken 2 times.
|
2 | FanVariableVolume fan = FanVariableVolume(model); |
| 390 |
1/1✓ Branch 1 taken 2 times.
|
2 | fan.setPressureRise(500); |
| 391 | |||
| 392 |
1/1✓ Branch 1 taken 2 times.
|
2 | CoilHeatingWater coilHeatingWater = CoilHeatingWater(model); |
| 393 | |||
| 394 |
1/1✓ Branch 1 taken 2 times.
|
2 | CoilCoolingDXTwoSpeed coilCooling = CoilCoolingDXTwoSpeed(model); |
| 395 | |||
| 396 |
1/1✓ Branch 1 taken 2 times.
|
2 | SetpointManagerScheduled deckTempSPM = SetpointManagerScheduled(model, _deckTempSchedule); |
| 397 | |||
| 398 |
1/1✓ Branch 1 taken 2 times.
|
2 | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); |
| 399 | |||
| 400 |
1/1✓ Branch 1 taken 2 times.
|
2 | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); |
| 401 | |||
| 402 |
1/1✓ Branch 1 taken 2 times.
|
2 | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); |
| 403 | |||
| 404 |
1/1✓ Branch 1 taken 2 times.
|
2 | outdoorAirSystem.addToNode(supplyOutletNode); |
| 405 |
1/1✓ Branch 1 taken 2 times.
|
2 | coilCooling.addToNode(supplyOutletNode); |
| 406 |
1/1✓ Branch 1 taken 2 times.
|
2 | coilHeatingWater.addToNode(supplyOutletNode); |
| 407 |
1/1✓ Branch 1 taken 2 times.
|
2 | fan.addToNode(supplyOutletNode); |
| 408 | |||
| 409 |
3/3✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
|
2 | Node node1 = fan.outletModelObject()->cast<Node>(); |
| 410 |
1/1✓ Branch 1 taken 2 times.
|
2 | deckTempSPM.addToNode(node1); |
| 411 | |||
| 412 | // Hot Water Plant | ||
| 413 | |||
| 414 |
1/1✓ Branch 1 taken 2 times.
|
2 | PlantLoop hotWaterPlant(model); |
| 415 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | hotWaterPlant.setName("Hot Water Loop"); |
| 416 |
1/1✓ Branch 1 taken 2 times.
|
2 | SizingPlant sizingPlant = hotWaterPlant.sizingPlant(); |
| 417 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | sizingPlant.setLoopType("Heating"); |
| 418 |
1/1✓ Branch 1 taken 2 times.
|
2 | sizingPlant.setDesignLoopExitTemperature(82.0); |
| 419 |
1/1✓ Branch 1 taken 2 times.
|
2 | sizingPlant.setLoopDesignTemperatureDifference(11.0); |
| 420 | |||
| 421 |
1/1✓ Branch 1 taken 2 times.
|
2 | Node hotWaterOutletNode = hotWaterPlant.supplyOutletNode(); |
| 422 |
1/1✓ Branch 1 taken 2 times.
|
2 | Node hotWaterInletNode = hotWaterPlant.supplyInletNode(); |
| 423 | |||
| 424 |
1/1✓ Branch 1 taken 2 times.
|
2 | PumpVariableSpeed pump = PumpVariableSpeed(model); |
| 425 | |||
| 426 |
1/1✓ Branch 1 taken 2 times.
|
2 | BoilerHotWater boiler = BoilerHotWater(model); |
| 427 | |||
| 428 |
1/1✓ Branch 1 taken 2 times.
|
2 | CurveBiquadratic boilerCurve(model); |
| 429 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | boilerCurve.setName("Boiler Efficiency"); |
| 430 |
1/1✓ Branch 1 taken 2 times.
|
2 | boilerCurve.setCoefficient1Constant(1.0); |
| 431 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
4 | boilerCurve.setInputUnitTypeforX("Dimensionless"); |
| 432 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
4 | boilerCurve.setInputUnitTypeforY("Dimensionless"); |
| 433 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | boilerCurve.setOutputUnitType("Dimensionless"); |
| 434 | |||
| 435 |
1/1✓ Branch 1 taken 2 times.
|
2 | boiler.setNormalizedBoilerEfficiencyCurve(boilerCurve); |
| 436 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | boiler.setEfficiencyCurveTemperatureEvaluationVariable("LeavingBoiler"); |
| 437 | |||
| 438 |
1/1✓ Branch 1 taken 2 times.
|
2 | pump.addToNode(hotWaterInletNode); |
| 439 | |||
| 440 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | Node node = hotWaterPlant.supplySplitter().lastOutletModelObject()->cast<Node>(); |
| 441 |
1/1✓ Branch 1 taken 2 times.
|
2 | boiler.addToNode(node); |
| 442 | |||
| 443 |
1/1✓ Branch 1 taken 2 times.
|
2 | PipeAdiabatic pipe(model); |
| 444 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | hotWaterPlant.addSupplyBranchForComponent(pipe); |
| 445 | |||
| 446 |
1/1✓ Branch 1 taken 2 times.
|
2 | PipeAdiabatic pipe2(model); |
| 447 |
1/1✓ Branch 1 taken 2 times.
|
2 | pipe2.addToNode(hotWaterOutletNode); |
| 448 | |||
| 449 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | hotWaterPlant.addDemandBranchForComponent(coilHeatingWater); |
| 450 | |||
| 451 |
1/1✓ Branch 1 taken 2 times.
|
2 | SetpointManagerScheduled hotWaterSPM(model, _hotWaterSchedule); |
| 452 | |||
| 453 |
1/1✓ Branch 1 taken 2 times.
|
2 | hotWaterSPM.addToNode(hotWaterOutletNode); |
| 454 | |||
| 455 | // Terminal | ||
| 456 | |||
| 457 |
1/1✓ Branch 1 taken 2 times.
|
2 | CoilHeatingWater waterReheatCoil(model, _alwaysOnSchedule); |
| 458 |
1/1✓ Branch 1 taken 2 times.
|
2 | AirTerminalSingleDuctVAVReheat waterTerminal(model, _alwaysOnSchedule, waterReheatCoil); |
| 459 |
1/1✓ Branch 1 taken 2 times.
|
2 | airLoopHVAC.addBranchForHVACComponent(waterTerminal); |
| 460 | |||
| 461 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | hotWaterPlant.addDemandBranchForComponent(waterReheatCoil); |
| 462 | |||
| 463 | 4 | return std::move(airLoopHVAC); | |
| 464 | 2 | } | |
| 465 | |||
| 466 | ✗ | Loop addSystemType6(Model& model) { | |
| 467 | ✗ | Model tempModel; | |
| 468 | ✗ | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); | |
| 469 | |||
| 470 | ✗ | auto _deckTempSchedule = deckTempSchedule(tempModel).clone(model).cast<Schedule>(); | |
| 471 | |||
| 472 | ✗ | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); | |
| 473 | ✗ | airLoopHVAC.setName("Packaged Rooftop VAV with PFP Boxes and Reheat"); | |
| 474 | ✗ | FanVariableVolume fan = FanVariableVolume(model); | |
| 475 | ✗ | fan.setPressureRise(500); | |
| 476 | |||
| 477 | ✗ | CoilHeatingElectric coilHeatingElectric = CoilHeatingElectric(model); | |
| 478 | |||
| 479 | ✗ | CoilCoolingDXTwoSpeed coilCooling = CoilCoolingDXTwoSpeed(model); | |
| 480 | |||
| 481 | ✗ | SetpointManagerScheduled deckTempSPM = SetpointManagerScheduled(model, _deckTempSchedule); | |
| 482 | |||
| 483 | ✗ | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); | |
| 484 | |||
| 485 | ✗ | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); | |
| 486 | |||
| 487 | ✗ | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); | |
| 488 | |||
| 489 | ✗ | outdoorAirSystem.addToNode(supplyOutletNode); | |
| 490 | ✗ | coilCooling.addToNode(supplyOutletNode); | |
| 491 | ✗ | fan.addToNode(supplyOutletNode); | |
| 492 | ✗ | Node fanInletNode = fan.inletModelObject()->cast<Node>(); | |
| 493 | ✗ | coilHeatingElectric.addToNode(fanInletNode); | |
| 494 | |||
| 495 | ✗ | Node node1 = fan.outletModelObject()->cast<Node>(); | |
| 496 | ✗ | deckTempSPM.addToNode(node1); | |
| 497 | |||
| 498 | ✗ | CoilHeatingElectric reheatCoil(model); | |
| 499 | ✗ | FanConstantVolume piuFan(model, _alwaysOnSchedule); | |
| 500 | ✗ | piuFan.setPressureRise(300); | |
| 501 | ✗ | AirTerminalSingleDuctParallelPIUReheat terminal(model, _alwaysOnSchedule, piuFan, reheatCoil); | |
| 502 | ✗ | airLoopHVAC.addBranchForHVACComponent(terminal); | |
| 503 | |||
| 504 | ✗ | return std::move(airLoopHVAC); | |
| 505 | ✗ | } | |
| 506 | |||
| 507 | 1 | Loop addSystemType7(Model& model) { | |
| 508 |
1/1✓ Branch 1 taken 1 time.
|
1 | Model tempModel; |
| 509 | |||
| 510 |
1/1✓ Branch 1 taken 1 time.
|
1 | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); |
| 511 | |||
| 512 |
4/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✓ Branch 10 taken 1 time.
|
1 | auto _deckTempSchedule = deckTempSchedule(tempModel).clone(model).cast<Schedule>(); |
| 513 | |||
| 514 |
4/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✓ Branch 10 taken 1 time.
|
1 | auto _hotWaterSchedule = hotWaterTempSchedule(tempModel).clone(model).cast<Schedule>(); |
| 515 | |||
| 516 |
4/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✓ Branch 10 taken 1 time.
|
1 | auto _chilledWaterSchedule = chilledWaterTempSchedule(tempModel).clone(model).cast<Schedule>(); |
| 517 | |||
| 518 |
1/1✓ Branch 1 taken 1 time.
|
1 | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); |
| 519 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | airLoopHVAC.setName("VAV with Reheat"); |
| 520 |
1/1✓ Branch 1 taken 1 time.
|
1 | SizingSystem sizingSystem = airLoopHVAC.sizingSystem(); |
| 521 |
1/1✓ Branch 1 taken 1 time.
|
1 | sizingSystem.setCentralCoolingDesignSupplyAirTemperature(12.8); |
| 522 |
1/1✓ Branch 1 taken 1 time.
|
1 | sizingSystem.setCentralHeatingDesignSupplyAirTemperature(12.8); |
| 523 | |||
| 524 |
1/1✓ Branch 1 taken 1 time.
|
1 | FanVariableVolume fan = FanVariableVolume(model); |
| 525 |
1/1✓ Branch 1 taken 1 time.
|
1 | fan.setPressureRise(500); |
| 526 | |||
| 527 |
1/1✓ Branch 1 taken 1 time.
|
1 | CoilHeatingWater coilHeatingWater = CoilHeatingWater(model); |
| 528 | |||
| 529 |
1/1✓ Branch 1 taken 1 time.
|
1 | CoilCoolingWater coilCoolingWater = CoilCoolingWater(model); |
| 530 | |||
| 531 |
1/1✓ Branch 1 taken 1 time.
|
1 | SetpointManagerScheduled deckTempSPM = SetpointManagerScheduled(model, _deckTempSchedule); |
| 532 | |||
| 533 |
1/1✓ Branch 1 taken 1 time.
|
1 | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); |
| 534 | |||
| 535 |
1/1✓ Branch 1 taken 1 time.
|
1 | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); |
| 536 | |||
| 537 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); |
| 538 | |||
| 539 |
1/1✓ Branch 1 taken 1 time.
|
1 | outdoorAirSystem.addToNode(supplyOutletNode); |
| 540 |
1/1✓ Branch 1 taken 1 time.
|
1 | coilCoolingWater.addToNode(supplyOutletNode); |
| 541 |
1/1✓ Branch 1 taken 1 time.
|
1 | coilHeatingWater.addToNode(supplyOutletNode); |
| 542 |
1/1✓ Branch 1 taken 1 time.
|
1 | fan.addToNode(supplyOutletNode); |
| 543 | |||
| 544 |
3/3✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
|
1 | Node node1 = fan.outletModelObject()->cast<Node>(); |
| 545 |
1/1✓ Branch 1 taken 1 time.
|
1 | deckTempSPM.addToNode(node1); |
| 546 | |||
| 547 | // Hot Water Plant | ||
| 548 | |||
| 549 |
1/1✓ Branch 1 taken 1 time.
|
1 | PlantLoop hotWaterPlant(model); |
| 550 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | hotWaterPlant.setName("Hot Water Loop"); |
| 551 |
1/1✓ Branch 1 taken 1 time.
|
1 | SizingPlant sizingPlant = hotWaterPlant.sizingPlant(); |
| 552 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | sizingPlant.setLoopType("Heating"); |
| 553 |
1/1✓ Branch 1 taken 1 time.
|
1 | sizingPlant.setDesignLoopExitTemperature(82.0); |
| 554 |
1/1✓ Branch 1 taken 1 time.
|
1 | sizingPlant.setLoopDesignTemperatureDifference(11.0); |
| 555 | |||
| 556 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node hotWaterOutletNode = hotWaterPlant.supplyOutletNode(); |
| 557 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node hotWaterInletNode = hotWaterPlant.supplyInletNode(); |
| 558 | |||
| 559 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node hotWaterDemandOutletNode = hotWaterPlant.demandOutletNode(); |
| 560 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node hotWaterDemandInletNode = hotWaterPlant.demandInletNode(); |
| 561 | |||
| 562 |
1/1✓ Branch 1 taken 1 time.
|
1 | PumpVariableSpeed pump = PumpVariableSpeed(model); |
| 563 | |||
| 564 |
1/1✓ Branch 1 taken 1 time.
|
1 | BoilerHotWater boiler = BoilerHotWater(model); |
| 565 | |||
| 566 |
1/1✓ Branch 1 taken 1 time.
|
1 | CurveBiquadratic boilerCurve(model); |
| 567 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | boilerCurve.setName("Boiler Efficiency"); |
| 568 |
1/1✓ Branch 1 taken 1 time.
|
1 | boilerCurve.setCoefficient1Constant(1.0); |
| 569 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
2 | boilerCurve.setInputUnitTypeforX("Dimensionless"); |
| 570 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
2 | boilerCurve.setInputUnitTypeforY("Dimensionless"); |
| 571 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | boilerCurve.setOutputUnitType("Dimensionless"); |
| 572 | |||
| 573 |
1/1✓ Branch 1 taken 1 time.
|
1 | boiler.setNormalizedBoilerEfficiencyCurve(boilerCurve); |
| 574 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | boiler.setEfficiencyCurveTemperatureEvaluationVariable("LeavingBoiler"); |
| 575 | |||
| 576 |
1/1✓ Branch 1 taken 1 time.
|
1 | pump.addToNode(hotWaterInletNode); |
| 577 | |||
| 578 |
4/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✓ Branch 10 taken 1 time.
|
1 | Node node = hotWaterPlant.supplySplitter().lastOutletModelObject()->cast<Node>(); |
| 579 |
1/1✓ Branch 1 taken 1 time.
|
1 | boiler.addToNode(node); |
| 580 | |||
| 581 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic pipe(model); |
| 582 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | hotWaterPlant.addSupplyBranchForComponent(pipe); |
| 583 | |||
| 584 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic hotWaterBypass(model); |
| 585 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | hotWaterPlant.addDemandBranchForComponent(hotWaterBypass); |
| 586 | |||
| 587 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | hotWaterPlant.addDemandBranchForComponent(coilHeatingWater); |
| 588 | |||
| 589 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic hotWaterDemandInlet(model); |
| 590 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic hotWaterDemandOutlet(model); |
| 591 | |||
| 592 |
1/1✓ Branch 1 taken 1 time.
|
1 | hotWaterDemandOutlet.addToNode(hotWaterDemandOutletNode); |
| 593 |
1/1✓ Branch 1 taken 1 time.
|
1 | hotWaterDemandInlet.addToNode(hotWaterDemandInletNode); |
| 594 | |||
| 595 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic pipe2(model); |
| 596 |
1/1✓ Branch 1 taken 1 time.
|
1 | pipe2.addToNode(hotWaterOutletNode); |
| 597 | |||
| 598 |
1/1✓ Branch 1 taken 1 time.
|
1 | SetpointManagerScheduled hotWaterSPM(model, _hotWaterSchedule); |
| 599 | |||
| 600 |
1/1✓ Branch 1 taken 1 time.
|
1 | hotWaterSPM.addToNode(hotWaterOutletNode); |
| 601 | |||
| 602 | // Chilled Water Plant | ||
| 603 | |||
| 604 |
1/1✓ Branch 1 taken 1 time.
|
1 | PlantLoop chilledWaterPlant(model); |
| 605 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | chilledWaterPlant.setName("Chilled Water Loop"); |
| 606 |
1/1✓ Branch 1 taken 1 time.
|
1 | SizingPlant chilledWaterSizing = chilledWaterPlant.sizingPlant(); |
| 607 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | chilledWaterSizing.setLoopType("Cooling"); |
| 608 |
1/1✓ Branch 1 taken 1 time.
|
1 | chilledWaterSizing.setDesignLoopExitTemperature(7.22); |
| 609 |
1/1✓ Branch 1 taken 1 time.
|
1 | chilledWaterSizing.setLoopDesignTemperatureDifference(6.67); |
| 610 | |||
| 611 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node chilledWaterOutletNode = chilledWaterPlant.supplyOutletNode(); |
| 612 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node chilledWaterInletNode = chilledWaterPlant.supplyInletNode(); |
| 613 | |||
| 614 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node chilledWaterDemandOutletNode = chilledWaterPlant.demandOutletNode(); |
| 615 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node chilledWaterDemandInletNode = chilledWaterPlant.demandInletNode(); |
| 616 | |||
| 617 |
1/1✓ Branch 1 taken 1 time.
|
1 | PumpVariableSpeed pump2 = PumpVariableSpeed(model); |
| 618 | |||
| 619 |
1/1✓ Branch 1 taken 1 time.
|
1 | pump2.addToNode(chilledWaterInletNode); |
| 620 | |||
| 621 |
1/1✓ Branch 1 taken 1 time.
|
1 | CurveBiquadratic ccFofT(model); |
| 622 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setCoefficient1Constant(0.258); |
| 623 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setCoefficient2x(0.0389); |
| 624 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setCoefficient3xPOW2(-0.000217); |
| 625 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setCoefficient4y(0.0469); |
| 626 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setCoefficient5yPOW2(-0.000943); |
| 627 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setCoefficient6xTIMESY(-0.000343); |
| 628 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setMinimumValueofx(5); |
| 629 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setMaximumValueofx(10); |
| 630 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setMinimumValueofy(24); |
| 631 |
1/1✓ Branch 1 taken 1 time.
|
1 | ccFofT.setMaximumValueofy(35); |
| 632 | |||
| 633 |
1/1✓ Branch 1 taken 1 time.
|
1 | CurveBiquadratic eiToCORFofT(model); |
| 634 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setCoefficient1Constant(0.934); |
| 635 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setCoefficient2x(-0.0582); |
| 636 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setCoefficient3xPOW2(0.0045); |
| 637 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setCoefficient4y(0.00243); |
| 638 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setCoefficient5yPOW2(0.000486); |
| 639 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setCoefficient6xTIMESY(-0.00122); |
| 640 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setMinimumValueofx(5); |
| 641 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setMaximumValueofx(10); |
| 642 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setMinimumValueofy(24); |
| 643 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofT.setMaximumValueofy(35); |
| 644 | |||
| 645 |
1/1✓ Branch 1 taken 1 time.
|
1 | CurveQuadratic eiToCORFofPLR(model); |
| 646 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofPLR.setCoefficient1Constant(0.222903); |
| 647 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofPLR.setCoefficient2x(0.313387); |
| 648 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofPLR.setCoefficient3xPOW2(0.46371); |
| 649 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofPLR.setMinimumValueofx(0); |
| 650 |
1/1✓ Branch 1 taken 1 time.
|
1 | eiToCORFofPLR.setMaximumValueofx(1); |
| 651 | |||
| 652 |
1/1✓ Branch 1 taken 1 time.
|
1 | ChillerElectricEIR chiller(model, ccFofT, eiToCORFofT, eiToCORFofPLR); |
| 653 | |||
| 654 |
4/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✓ Branch 10 taken 1 time.
|
1 | node = chilledWaterPlant.supplySplitter().lastOutletModelObject()->cast<Node>(); |
| 655 |
1/1✓ Branch 1 taken 1 time.
|
1 | chiller.addToNode(node); |
| 656 | |||
| 657 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic pipe3(model); |
| 658 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | chilledWaterPlant.addSupplyBranchForComponent(pipe3); |
| 659 | |||
| 660 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic pipe4(model); |
| 661 |
1/1✓ Branch 1 taken 1 time.
|
1 | pipe4.addToNode(chilledWaterOutletNode); |
| 662 | |||
| 663 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | chilledWaterPlant.addDemandBranchForComponent(coilCoolingWater); |
| 664 | |||
| 665 |
1/1✓ Branch 1 taken 1 time.
|
1 | SetpointManagerScheduled chilledWaterSPM(model, _chilledWaterSchedule); |
| 666 | |||
| 667 |
1/1✓ Branch 1 taken 1 time.
|
1 | chilledWaterSPM.addToNode(chilledWaterOutletNode); |
| 668 | |||
| 669 |
1/1✓ Branch 1 taken 1 time.
|
1 | CoilHeatingWater waterReheatCoil(model, _alwaysOnSchedule); |
| 670 |
1/1✓ Branch 1 taken 1 time.
|
1 | AirTerminalSingleDuctVAVReheat waterTerminal(model, _alwaysOnSchedule, waterReheatCoil); |
| 671 |
1/1✓ Branch 1 taken 1 time.
|
1 | airLoopHVAC.addBranchForHVACComponent(waterTerminal); |
| 672 | |||
| 673 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic chilledWaterDemandBypass(model); |
| 674 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | chilledWaterPlant.addDemandBranchForComponent(chilledWaterDemandBypass); |
| 675 | |||
| 676 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | hotWaterPlant.addDemandBranchForComponent(waterReheatCoil); |
| 677 | |||
| 678 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic chilledWaterDemandInlet(model); |
| 679 |
1/1✓ Branch 1 taken 1 time.
|
1 | chilledWaterDemandInlet.addToNode(chilledWaterDemandInletNode); |
| 680 | |||
| 681 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic chilledWaterDemandOutlet(model); |
| 682 |
1/1✓ Branch 1 taken 1 time.
|
1 | chilledWaterDemandOutlet.addToNode(chilledWaterDemandOutletNode); |
| 683 | |||
| 684 | // Condenser System | ||
| 685 | |||
| 686 |
1/1✓ Branch 1 taken 1 time.
|
1 | PlantLoop condenserSystem(model); |
| 687 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | condenserSystem.setName("Condenser Water Loop"); |
| 688 |
1/1✓ Branch 1 taken 1 time.
|
1 | SizingPlant condenserSizing = condenserSystem.sizingPlant(); |
| 689 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | condenserSizing.setLoopType("Condenser"); |
| 690 |
1/1✓ Branch 1 taken 1 time.
|
1 | condenserSizing.setDesignLoopExitTemperature(29.4); |
| 691 |
1/1✓ Branch 1 taken 1 time.
|
1 | condenserSizing.setLoopDesignTemperatureDifference(5.6); |
| 692 | |||
| 693 |
1/1✓ Branch 1 taken 1 time.
|
1 | CoolingTowerSingleSpeed tower(model); |
| 694 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | condenserSystem.addSupplyBranchForComponent(tower); |
| 695 | |||
| 696 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic condenserSupplyBypass(model); |
| 697 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | condenserSystem.addSupplyBranchForComponent(condenserSupplyBypass); |
| 698 | |||
| 699 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node condenserSystemDemandOutletNode = condenserSystem.demandOutletNode(); |
| 700 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node condenserSystemDemandInletNode = condenserSystem.demandInletNode(); |
| 701 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node condenserSystemSupplyOutletNode = condenserSystem.supplyOutletNode(); |
| 702 |
1/1✓ Branch 1 taken 1 time.
|
1 | Node condenserSystemSupplyInletNode = condenserSystem.supplyInletNode(); |
| 703 | |||
| 704 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic condenserSupplyOutlet(model); |
| 705 | |||
| 706 |
1/1✓ Branch 1 taken 1 time.
|
1 | condenserSupplyOutlet.addToNode(condenserSystemSupplyOutletNode); |
| 707 | |||
| 708 |
1/1✓ Branch 1 taken 1 time.
|
1 | PumpVariableSpeed pump3 = PumpVariableSpeed(model); |
| 709 | |||
| 710 |
1/1✓ Branch 1 taken 1 time.
|
1 | pump3.addToNode(condenserSystemSupplyInletNode); |
| 711 | |||
| 712 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | condenserSystem.addDemandBranchForComponent(chiller); |
| 713 | |||
| 714 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic condenserDemandBypass(model); |
| 715 | |||
| 716 |
2/2✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
|
1 | condenserSystem.addDemandBranchForComponent(condenserDemandBypass); |
| 717 | |||
| 718 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic condenserDemandInlet(model); |
| 719 | |||
| 720 |
1/1✓ Branch 1 taken 1 time.
|
1 | condenserDemandInlet.addToNode(condenserSystemDemandInletNode); |
| 721 | |||
| 722 |
1/1✓ Branch 1 taken 1 time.
|
1 | PipeAdiabatic condenserDemandOutlet(model); |
| 723 | |||
| 724 |
1/1✓ Branch 1 taken 1 time.
|
1 | condenserDemandOutlet.addToNode(condenserSystemDemandOutletNode); |
| 725 | |||
| 726 |
1/1✓ Branch 1 taken 1 time.
|
1 | SetpointManagerFollowOutdoorAirTemperature spm(model); |
| 727 | |||
| 728 |
1/1✓ Branch 1 taken 1 time.
|
1 | spm.addToNode(condenserSystemSupplyOutletNode); |
| 729 | |||
| 730 | 2 | return std::move(airLoopHVAC); | |
| 731 | 1 | } | |
| 732 | |||
| 733 | ✗ | Loop addSystemType8(Model& model) { | |
| 734 | ✗ | Model tempModel; | |
| 735 | ✗ | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); | |
| 736 | |||
| 737 | ✗ | auto _chilledWaterSchedule = chilledWaterTempSchedule(tempModel).clone(model).cast<Schedule>(); | |
| 738 | |||
| 739 | ✗ | auto _deckTempSchedule = deckTempSchedule(tempModel).clone(model).cast<Schedule>(); | |
| 740 | |||
| 741 | ✗ | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); | |
| 742 | ✗ | airLoopHVAC.setName("VAV with PFP Boxes and Reheat"); | |
| 743 | ✗ | FanVariableVolume fan = FanVariableVolume(model); | |
| 744 | ✗ | fan.setPressureRise(500); | |
| 745 | |||
| 746 | ✗ | CoilHeatingElectric coilHeatingElectric = CoilHeatingElectric(model); | |
| 747 | |||
| 748 | ✗ | CoilCoolingWater coilCoolingWater = CoilCoolingWater(model); | |
| 749 | |||
| 750 | ✗ | SetpointManagerScheduled deckTempSPM = SetpointManagerScheduled(model, _deckTempSchedule); | |
| 751 | |||
| 752 | ✗ | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); | |
| 753 | |||
| 754 | ✗ | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); | |
| 755 | |||
| 756 | ✗ | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); | |
| 757 | |||
| 758 | ✗ | outdoorAirSystem.addToNode(supplyOutletNode); | |
| 759 | ✗ | coilCoolingWater.addToNode(supplyOutletNode); | |
| 760 | ✗ | fan.addToNode(supplyOutletNode); | |
| 761 | ✗ | Node fanInletNode = fan.inletModelObject()->cast<Node>(); | |
| 762 | ✗ | coilHeatingElectric.addToNode(fanInletNode); | |
| 763 | |||
| 764 | ✗ | Node node1 = fan.outletModelObject()->cast<Node>(); | |
| 765 | ✗ | deckTempSPM.addToNode(node1); | |
| 766 | |||
| 767 | // Chilled Water Plant | ||
| 768 | |||
| 769 | ✗ | PlantLoop chilledWaterPlant(model); | |
| 770 | ✗ | chilledWaterPlant.setName("Chilled Water Loop"); | |
| 771 | ✗ | SizingPlant sizingPlant = chilledWaterPlant.sizingPlant(); | |
| 772 | ✗ | sizingPlant.setLoopType("Cooling"); | |
| 773 | ✗ | sizingPlant.setDesignLoopExitTemperature(7.22); | |
| 774 | ✗ | sizingPlant.setLoopDesignTemperatureDifference(6.67); | |
| 775 | |||
| 776 | ✗ | Node chilledWaterOutletNode = chilledWaterPlant.supplyOutletNode(); | |
| 777 | ✗ | Node chilledWaterInletNode = chilledWaterPlant.supplyInletNode(); | |
| 778 | |||
| 779 | ✗ | PumpVariableSpeed pump2 = PumpVariableSpeed(model); | |
| 780 | |||
| 781 | ✗ | pump2.addToNode(chilledWaterInletNode); | |
| 782 | |||
| 783 | ✗ | ChillerElectricEIR chiller(model); | |
| 784 | |||
| 785 | ✗ | Node node = chilledWaterPlant.supplySplitter().lastOutletModelObject()->cast<Node>(); | |
| 786 | ✗ | chiller.addToNode(node); | |
| 787 | |||
| 788 | ✗ | chilledWaterPlant.addDemandBranchForComponent(coilCoolingWater); | |
| 789 | |||
| 790 | ✗ | PipeAdiabatic pipe(model); | |
| 791 | ✗ | chilledWaterPlant.addSupplyBranchForComponent(pipe); | |
| 792 | |||
| 793 | ✗ | PipeAdiabatic pipe2(model); | |
| 794 | ✗ | pipe2.addToNode(chilledWaterOutletNode); | |
| 795 | |||
| 796 | ✗ | SetpointManagerScheduled chilledWaterSPM(model, _chilledWaterSchedule); | |
| 797 | |||
| 798 | ✗ | chilledWaterSPM.addToNode(chilledWaterOutletNode); | |
| 799 | |||
| 800 | ✗ | CoilHeatingElectric reheatCoil(model); | |
| 801 | ✗ | FanConstantVolume piuFan(model, _alwaysOnSchedule); | |
| 802 | ✗ | piuFan.setPressureRise(300); | |
| 803 | ✗ | AirTerminalSingleDuctParallelPIUReheat terminal(model, _alwaysOnSchedule, piuFan, reheatCoil); | |
| 804 | ✗ | airLoopHVAC.addBranchForHVACComponent(terminal); | |
| 805 | |||
| 806 | ✗ | return std::move(airLoopHVAC); | |
| 807 | ✗ | } | |
| 808 | |||
| 809 | ✗ | Loop addSystemType9(Model& model) { | |
| 810 | ✗ | Model tempModel; | |
| 811 | ✗ | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); | |
| 812 | |||
| 813 | ✗ | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); | |
| 814 | ✗ | airLoopHVAC.setName("Gas Fired Furnace"); | |
| 815 | // when an airloophvac is contructed, its constructor automatically creates a sizing:system object | ||
| 816 | // the default sizing:system contstructor makes a system:sizing object appropriate for a multizone VAV system | ||
| 817 | // this systems is a constant volume system with no VAV terminals, and needs different default settings | ||
| 818 | |||
| 819 | // get the sizing:system object associated with the airloophvac | ||
| 820 | ✗ | SizingSystem sizingSystem = airLoopHVAC.sizingSystem(); | |
| 821 | |||
| 822 | //set the default parameters correctly for a constant volume system with no VAV terminals | ||
| 823 | ✗ | sizingSystem.setTypeofLoadtoSizeOn("Sensible"); | |
| 824 | ✗ | sizingSystem.autosizeDesignOutdoorAirFlowRate(); | |
| 825 | ✗ | sizingSystem.setCentralHeatingMaximumSystemAirFlowRatio(1.0); | |
| 826 | ✗ | sizingSystem.setPreheatDesignTemperature(7.0); | |
| 827 | ✗ | sizingSystem.setPreheatDesignHumidityRatio(0.008); | |
| 828 | ✗ | sizingSystem.setPrecoolDesignTemperature(12.8); | |
| 829 | ✗ | sizingSystem.setPrecoolDesignHumidityRatio(0.008); | |
| 830 | ✗ | sizingSystem.setCentralCoolingDesignSupplyAirTemperature(12.8); | |
| 831 | ✗ | sizingSystem.setCentralHeatingDesignSupplyAirTemperature(40.0); | |
| 832 | ✗ | sizingSystem.setSizingOption("NonCoincident"); | |
| 833 | ✗ | sizingSystem.setAllOutdoorAirinCooling(false); | |
| 834 | ✗ | sizingSystem.setAllOutdoorAirinHeating(false); | |
| 835 | ✗ | sizingSystem.setCentralCoolingDesignSupplyAirHumidityRatio(0.0085); | |
| 836 | ✗ | sizingSystem.setCentralHeatingDesignSupplyAirHumidityRatio(0.0080); | |
| 837 | ✗ | sizingSystem.setCoolingDesignAirFlowMethod("DesignDay"); | |
| 838 | ✗ | sizingSystem.setCoolingDesignAirFlowRate(0.0); | |
| 839 | ✗ | sizingSystem.setHeatingDesignAirFlowMethod("DesignDay"); | |
| 840 | ✗ | sizingSystem.setHeatingDesignAirFlowRate(0.0); | |
| 841 | ✗ | sizingSystem.setSystemOutdoorAirMethod("ZoneSum"); | |
| 842 | |||
| 843 | ✗ | FanConstantVolume fan = FanConstantVolume(model); | |
| 844 | ✗ | fan.setPressureRise(500); | |
| 845 | |||
| 846 | ✗ | CoilHeatingGas coilHeatingGas = CoilHeatingGas(model, _alwaysOnSchedule); | |
| 847 | |||
| 848 | ✗ | SetpointManagerSingleZoneReheat setpointMSZR(model); | |
| 849 | |||
| 850 | ✗ | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); | |
| 851 | |||
| 852 | ✗ | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); | |
| 853 | |||
| 854 | ✗ | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); | |
| 855 | |||
| 856 | ✗ | outdoorAirSystem.addToNode(supplyOutletNode); | |
| 857 | ✗ | coilHeatingGas.addToNode(supplyOutletNode); | |
| 858 | ✗ | fan.addToNode(supplyOutletNode); | |
| 859 | |||
| 860 | ✗ | Node node1 = fan.outletModelObject()->cast<Node>(); | |
| 861 | ✗ | setpointMSZR.addToNode(node1); | |
| 862 | |||
| 863 | ✗ | AirTerminalSingleDuctConstantVolumeNoReheat terminal(model, _alwaysOnSchedule); | |
| 864 | |||
| 865 | ✗ | airLoopHVAC.addBranchForHVACComponent(terminal); | |
| 866 | |||
| 867 | ✗ | return std::move(airLoopHVAC); | |
| 868 | ✗ | } | |
| 869 | |||
| 870 | ✗ | Loop addSystemType10(Model& model) { | |
| 871 | ✗ | Model tempModel; | |
| 872 | ✗ | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); | |
| 873 | |||
| 874 | ✗ | AirLoopHVAC airLoopHVAC = AirLoopHVAC(model); | |
| 875 | ✗ | airLoopHVAC.setName("Electric Furnace"); | |
| 876 | // when an airloophvac is contructed, its constructor automatically creates a sizing:system object | ||
| 877 | // the default sizing:system contstructor makes a system:sizing object appropriate for a multizone VAV system | ||
| 878 | // this systems is a constant volume system with no VAV terminals, and needs different default settings | ||
| 879 | |||
| 880 | // get the sizing:system object associated with the airloophvac | ||
| 881 | ✗ | SizingSystem sizingSystem = airLoopHVAC.sizingSystem(); | |
| 882 | |||
| 883 | //set the default parameters correctly for a constant volume system with no VAV terminals | ||
| 884 | ✗ | sizingSystem.setTypeofLoadtoSizeOn("Sensible"); | |
| 885 | ✗ | sizingSystem.autosizeDesignOutdoorAirFlowRate(); | |
| 886 | ✗ | sizingSystem.setCentralHeatingMaximumSystemAirFlowRatio(1.0); | |
| 887 | ✗ | sizingSystem.setPreheatDesignTemperature(7.0); | |
| 888 | ✗ | sizingSystem.setPreheatDesignHumidityRatio(0.008); | |
| 889 | ✗ | sizingSystem.setPrecoolDesignTemperature(12.8); | |
| 890 | ✗ | sizingSystem.setPrecoolDesignHumidityRatio(0.008); | |
| 891 | ✗ | sizingSystem.setCentralCoolingDesignSupplyAirTemperature(12.8); | |
| 892 | ✗ | sizingSystem.setCentralHeatingDesignSupplyAirTemperature(40.0); | |
| 893 | ✗ | sizingSystem.setSizingOption("NonCoincident"); | |
| 894 | ✗ | sizingSystem.setAllOutdoorAirinCooling(false); | |
| 895 | ✗ | sizingSystem.setAllOutdoorAirinHeating(false); | |
| 896 | ✗ | sizingSystem.setCentralCoolingDesignSupplyAirHumidityRatio(0.0085); | |
| 897 | ✗ | sizingSystem.setCentralHeatingDesignSupplyAirHumidityRatio(0.0080); | |
| 898 | ✗ | sizingSystem.setCoolingDesignAirFlowMethod("DesignDay"); | |
| 899 | ✗ | sizingSystem.setCoolingDesignAirFlowRate(0.0); | |
| 900 | ✗ | sizingSystem.setHeatingDesignAirFlowMethod("DesignDay"); | |
| 901 | ✗ | sizingSystem.setHeatingDesignAirFlowRate(0.0); | |
| 902 | ✗ | sizingSystem.setSystemOutdoorAirMethod("ZoneSum"); | |
| 903 | |||
| 904 | ✗ | FanConstantVolume fan = FanConstantVolume(model); | |
| 905 | ✗ | fan.setPressureRise(500); | |
| 906 | |||
| 907 | ✗ | CoilHeatingElectric coilHeatingElectric = CoilHeatingElectric(model); | |
| 908 | |||
| 909 | ✗ | SetpointManagerSingleZoneReheat setpointMSZR(model); | |
| 910 | |||
| 911 | ✗ | ControllerOutdoorAir controllerOutdoorAir = ControllerOutdoorAir(model); | |
| 912 | |||
| 913 | ✗ | AirLoopHVACOutdoorAirSystem outdoorAirSystem = AirLoopHVACOutdoorAirSystem(model, controllerOutdoorAir); | |
| 914 | |||
| 915 | ✗ | Node supplyOutletNode = airLoopHVAC.supplyOutletNode(); | |
| 916 | |||
| 917 | ✗ | outdoorAirSystem.addToNode(supplyOutletNode); | |
| 918 | ✗ | coilHeatingElectric.addToNode(supplyOutletNode); | |
| 919 | ✗ | fan.addToNode(supplyOutletNode); | |
| 920 | |||
| 921 | ✗ | Node node1 = fan.outletModelObject()->cast<Node>(); | |
| 922 | ✗ | setpointMSZR.addToNode(node1); | |
| 923 | |||
| 924 | ✗ | AirTerminalSingleDuctConstantVolumeNoReheat terminal(model, _alwaysOnSchedule); | |
| 925 | |||
| 926 | ✗ | airLoopHVAC.addBranchForHVACComponent(terminal); | |
| 927 | |||
| 928 | ✗ | return std::move(airLoopHVAC); | |
| 929 | ✗ | } | |
| 930 | |||
| 931 | ✗ | Loop addSHWLoop(Model& model) { | |
| 932 | |||
| 933 | ✗ | Model tempModel; | |
| 934 | // Make a schedule at 140°F | ||
| 935 | ✗ | auto shwSchedule = makeSchedule(tempModel, "SHW_Temperature_140F", 60).clone(model).cast<Schedule>(); | |
| 936 | |||
| 937 | ✗ | Schedule _alwaysOnSchedule = model.alwaysOnDiscreteSchedule(); | |
| 938 | |||
| 939 | // SHW Plant | ||
| 940 | ✗ | PlantLoop shwPlant(model); | |
| 941 | ✗ | shwPlant.setName("Service Water Loop"); | |
| 942 | |||
| 943 | // Initialize nodes | ||
| 944 | ✗ | Node shwOutletNode = shwPlant.supplyOutletNode(); | |
| 945 | ✗ | Node shwInletNode = shwPlant.supplyInletNode(); | |
| 946 | ✗ | Node shwDemandOutletNode = shwPlant.demandOutletNode(); | |
| 947 | ✗ | Node shwDemandInletNode = shwPlant.demandInletNode(); | |
| 948 | |||
| 949 | // Set temperatures | ||
| 950 | ✗ | shwPlant.setMaximumLoopTemperature(60); | |
| 951 | ✗ | shwPlant.setMinimumLoopTemperature(10); | |
| 952 | ✗ | SizingPlant sizingPlant = shwPlant.sizingPlant(); | |
| 953 | ✗ | sizingPlant.setLoopType("Heating"); | |
| 954 | // Supply at 60°C (140°F), delta is 5°K (9°F) | ||
| 955 | ✗ | sizingPlant.setDesignLoopExitTemperature(60); | |
| 956 | ✗ | sizingPlant.setLoopDesignTemperatureDifference(5.0); | |
| 957 | |||
| 958 | ✗ | SetpointManagerScheduled shwSPM(model, shwSchedule); | |
| 959 | ✗ | shwSPM.addToNode(shwOutletNode); | |
| 960 | |||
| 961 | // Pump: assume 10 ft of head, just from friction (recirculation) | ||
| 962 | ✗ | PumpConstantSpeed swh_pump(model); | |
| 963 | ✗ | swh_pump.setRatedPumpHead(29891); | |
| 964 | ✗ | swh_pump.setPumpControlType("Intermittent"); | |
| 965 | ✗ | swh_pump.addToNode(shwInletNode); | |
| 966 | |||
| 967 | // WaterHeater | ||
| 968 | // Mostly taken from prototype input for HighRiseApartment | ||
| 969 | ✗ | WaterHeaterMixed wh(model); | |
| 970 | // Connect it to loop | ||
| 971 | ✗ | shwPlant.addSupplyBranchForComponent(wh); | |
| 972 | // 600 gal, 140F cut-out, delta of 5K(9F) means cut-in is 131°F | ||
| 973 | ✗ | wh.setName("600 gal Water Heater - 600 kBtu/hr"); | |
| 974 | ✗ | wh.setTankVolume(2.2712470703819108); | |
| 975 | ✗ | wh.setSetpointTemperatureSchedule(shwSchedule); | |
| 976 | ✗ | wh.setDeadbandTemperatureDifference(5); | |
| 977 | // 600 kBTU/h | ||
| 978 | ✗ | wh.setHeaterMaximumCapacity(175842); | |
| 979 | // Max temp is 180F | ||
| 980 | ✗ | wh.setMaximumTemperatureLimit(82.22222); | |
| 981 | ✗ | wh.setHeaterControlType("Cycle"); | |
| 982 | ✗ | wh.setOffCycleParasiticHeatFractiontoTank(0.8); | |
| 983 | ✗ | wh.setIndirectWaterHeatingRecoveryTime(1.5); // 1.5hrs | |
| 984 | |||
| 985 | // Assume gas | ||
| 986 | ✗ | wh.setHeaterFuelType("NaturalGas"); | |
| 987 | // Result from running the prototype building for 90.1-2013 HighRiseApartment | ||
| 988 | ✗ | wh.setHeaterThermalEfficiency(0.80154340529419); | |
| 989 | |||
| 990 | // Set it to Ambient schedule, at 70°F | ||
| 991 | ✗ | auto ambientSchedule = makeSchedule(tempModel, "Water Heater Ambient Temp Schedule - 70F", 21.11).clone(model).cast<Schedule>(); | |
| 992 | ✗ | wh.setAmbientTemperatureSchedule(ambientSchedule); | |
| 993 | ✗ | wh.setAmbientTemperatureIndicator("Schedule"); | |
| 994 | |||
| 995 | // 8742 Btu/hr (from prototype) | ||
| 996 | ✗ | wh.setOffCycleParasiticFuelConsumptionRate(2562); | |
| 997 | ✗ | wh.setOnCycleParasiticFuelConsumptionRate(2562); | |
| 998 | ✗ | wh.setOffCycleParasiticFuelType("NaturalGas"); | |
| 999 | ✗ | wh.setOnCycleParasiticFuelType("NaturalGas"); | |
| 1000 | ✗ | wh.setOffCycleLossCoefficienttoAmbientTemperature(6.0); | |
| 1001 | ✗ | wh.setOnCycleLossCoefficienttoAmbientTemperature(6.0); | |
| 1002 | ✗ | wh.setEndUseSubcategory("Service Hot Water Heating"); | |
| 1003 | |||
| 1004 | // Make a typical DHW Demand schedule | ||
| 1005 | ✗ | ScheduleRuleset dhw_flow_sch(model); | |
| 1006 | ✗ | dhw_flow_sch.setName("ESTAR MFHR DHW Fraction Schedule"); | |
| 1007 | |||
| 1008 | ✗ | ScheduleDay dhw_sch_day = dhw_flow_sch.defaultDaySchedule(); | |
| 1009 | ✗ | dhw_sch_day.setName("ESTAR MFHR DHW Schedule Day"); | |
| 1010 | |||
| 1011 | // dhw_flow_sch.setScheduleTypeLimits(frac); | ||
| 1012 | |||
| 1013 | // map of schedule info: | ||
| 1014 | // Key is the hour until | ||
| 1015 | // Value is the value | ||
| 1016 | // | ||
| 1017 | std::map<int, double> schInfo = { | ||
| 1018 | std::pair<int, double>(6, 0.05), std::pair<int, double>(7, 0.3), std::pair<int, double>(8, 0.5), std::pair<int, double>(9, 0.4), | ||
| 1019 | std::pair<int, double>(11, 0.3), std::pair<int, double>(12, 0.35), std::pair<int, double>(13, 0.40), std::pair<int, double>(15, 0.35), | ||
| 1020 | std::pair<int, double>(17, 0.30), std::pair<int, double>(19, 0.5), std::pair<int, double>(20, 0.40), std::pair<int, double>(21, 0.35), | ||
| 1021 | std::pair<int, double>(22, 0.45), std::pair<int, double>(23, 0.3), std::pair<int, double>(24, 0.05), | ||
| 1022 | ✗ | }; | |
| 1023 | |||
| 1024 | ✗ | std::map<int, double>::iterator it; | |
| 1025 | |||
| 1026 | ✗ | double dhw_daily_frac = 0; | |
| 1027 | ✗ | int lastHour = 0; | |
| 1028 | ✗ | for (it = schInfo.begin(); it != schInfo.end(); it++) { | |
| 1029 | ✗ | int hour = it->first; | |
| 1030 | ✗ | double value = it->second; | |
| 1031 | ✗ | Time t = Time(0, hour, 0, 0); | |
| 1032 | ✗ | dhw_sch_day.addValue(t, value); | |
| 1033 | ✗ | dhw_daily_frac += (hour - lastHour) * it->second; | |
| 1034 | ✗ | lastHour = hour; | |
| 1035 | } | ||
| 1036 | |||
| 1037 | // Assume occupancy type = "Medium" => 25 GPM / person | ||
| 1038 | // Assume 100 apartments, with 200 occupants, Medium Occupancy, and some standard GPMs (1.5 kitchen, 1.0 bathroom, 1.2 showerheads) | ||
| 1039 | ✗ | int num_occupants = 200; | |
| 1040 | ✗ | int gpm_per_person_per_day = 25; | |
| 1041 | ✗ | int baseline_occupant_gal_per_day = num_occupants * gpm_per_person_per_day; | |
| 1042 | // One kitchen, one bath per apartment | ||
| 1043 | ✗ | int num_kitchen_faucets = 100; | |
| 1044 | ✗ | int num_bathroom_faucets = 100; | |
| 1045 | ✗ | double proposed_gpm_kitchen = 1.5; | |
| 1046 | ✗ | double proposed_gpm_bathroom = 1.0; | |
| 1047 | ✗ | double proposed_gpm_showerhead = 1.2; | |
| 1048 | |||
| 1049 | // Calculate the weighted average gpm for faucets | ||
| 1050 | ✗ | double proposed_gpm_faucet_weighted = | |
| 1051 | ✗ | (num_kitchen_faucets * proposed_gpm_kitchen + num_bathroom_faucets * proposed_gpm_bathroom) / (num_kitchen_faucets + num_bathroom_faucets); | |
| 1052 | |||
| 1053 | ✗ | double proposed_occupant_gal_per_day = | |
| 1054 | ✗ | baseline_occupant_gal_per_day * (0.36 + (0.54 * proposed_gpm_showerhead + 0.1 * proposed_gpm_faucet_weighted) / 2.5); | |
| 1055 | |||
| 1056 | // No dishwashers nor laundry | ||
| 1057 | ✗ | double total_gal_per_day = proposed_occupant_gal_per_day; | |
| 1058 | |||
| 1059 | // Divide by total daily fraction | ||
| 1060 | ✗ | double dhw_gpm = total_gal_per_day / (60 * dhw_daily_frac); | |
| 1061 | |||
| 1062 | // Add a sample service hot water connection | ||
| 1063 | ✗ | WaterUseEquipmentDefinition water_use_equip_def(model); | |
| 1064 | ✗ | water_use_equip_def.setName("SWH Definition"); | |
| 1065 | ✗ | water_use_equip_def.setName("Whole Building Water Equipment Definition - 100 units 200 occupants"); | |
| 1066 | ✗ | water_use_equip_def.setPeakFlowRate(dhw_gpm * 6.309019639949753e-05); | |
| 1067 | |||
| 1068 | // Set Fraction sensible and latent | ||
| 1069 | |||
| 1070 | //Make a time stamp to use in multiple places | ||
| 1071 | ✗ | Time osTime = Time(0, 24, 0, 0); | |
| 1072 | |||
| 1073 | //Schedule Ruleset | ||
| 1074 | ✗ | ScheduleRuleset fracSchedule = ScheduleRuleset(model); | |
| 1075 | ✗ | fracSchedule.setName("Fraction Sensible - 0.2"); | |
| 1076 | ✗ | fracSchedule.defaultDaySchedule().setName("Fraction Sensible DefaultDay - 0.2"); | |
| 1077 | ✗ | fracSchedule.defaultDaySchedule().addValue(osTime, 0.2); | |
| 1078 | ✗ | water_use_equip_def.setSensibleFractionSchedule(fracSchedule); | |
| 1079 | |||
| 1080 | ✗ | fracSchedule = ScheduleRuleset(model); | |
| 1081 | ✗ | fracSchedule.setName("Fraction Sensible - 0.05"); | |
| 1082 | ✗ | fracSchedule.defaultDaySchedule().setName("Fraction Latent DefaultDay - 0.05"); | |
| 1083 | ✗ | fracSchedule.defaultDaySchedule().addValue(osTime, 0.05); | |
| 1084 | ✗ | water_use_equip_def.setLatentFractionSchedule(fracSchedule); | |
| 1085 | |||
| 1086 | // TODO: make 120F? | ||
| 1087 | ✗ | water_use_equip_def.setTargetTemperatureSchedule(shwSchedule); | |
| 1088 | |||
| 1089 | ✗ | WaterUseEquipment water_use_equip(water_use_equip_def); | |
| 1090 | ✗ | water_use_equip.setFlowRateFractionSchedule(dhw_flow_sch); | |
| 1091 | ✗ | water_use_equip.setName("ESTAR MFHR Whole Building Water Use Equipment"); | |
| 1092 | |||
| 1093 | // add water use connection | ||
| 1094 | ✗ | WaterUseConnections water_use_connection(model); | |
| 1095 | ✗ | water_use_connection.addWaterUseEquipment(water_use_equip); | |
| 1096 | ✗ | water_use_connection.setName("ESTAR MFHR DHW Water Use Connection"); | |
| 1097 | |||
| 1098 | ✗ | shwPlant.addDemandBranchForComponent(water_use_connection); | |
| 1099 | |||
| 1100 | /* | ||
| 1101 | * PipeAdiabatic shwBypass(model); | ||
| 1102 | * shwPlant.addDemandBranchForComponent(shwBypass); | ||
| 1103 | * | ||
| 1104 | * shwPlant.addDemandBranchForComponent(coilHeatingWater); | ||
| 1105 | * | ||
| 1106 | * PipeAdiabatic shwDemandInlet(model); | ||
| 1107 | * PipeAdiabatic shwDemandOutlet(model); | ||
| 1108 | * | ||
| 1109 | * shwDemandOutlet.addToNode(shwDemandOutletNode); | ||
| 1110 | * shwDemandInlet.addToNode(shwDemandInletNode); | ||
| 1111 | * | ||
| 1112 | * PipeAdiabatic pipe2(model); | ||
| 1113 | * pipe2.addToNode(shwOutletNode); | ||
| 1114 | * | ||
| 1115 | */ | ||
| 1116 | |||
| 1117 | ✗ | return std::move(shwPlant); | |
| 1118 | ✗ | } | |
| 1119 | |||
| 1120 | } // namespace model | ||
| 1121 | |||
| 1122 | } // namespace openstudio | ||
| 1123 |