src/energyplus/ForwardTranslator/ForwardTranslateAirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed.cpp
| Line | Branch | Exec | Source |
|---|---|---|---|
| 1 | /*********************************************************************************************************************** | ||
| 2 | * OpenStudio(R), Copyright (c) Alliance for Energy Innovation, LLC. | ||
| 3 | * See also https://openstudio.net/license | ||
| 4 | ***********************************************************************************************************************/ | ||
| 5 | |||
| 6 | #include "../ForwardTranslator.hpp" | ||
| 7 | #include "../../model/Model.hpp" | ||
| 8 | #include "../../model/Schedule.hpp" | ||
| 9 | #include "../../model/Schedule_Impl.hpp" | ||
| 10 | #include "../../model/AirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed.hpp" | ||
| 11 | #include "../../model/AirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed_Impl.hpp" | ||
| 12 | #include "../../model/Node.hpp" | ||
| 13 | #include "../../model/Node_Impl.hpp" | ||
| 14 | #include "../../model/ThermalZone.hpp" | ||
| 15 | #include "../../model/ThermalZone_Impl.hpp" | ||
| 16 | #include "../../model/CoilCoolingDXMultiSpeed.hpp" | ||
| 17 | #include "../../model/CoilCoolingDXMultiSpeed_Impl.hpp" | ||
| 18 | #include <utilities/idd/AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeed_FieldEnums.hxx> | ||
| 19 | #include <utilities/idd/Fan_ConstantVolume_FieldEnums.hxx> | ||
| 20 | #include <utilities/idd/Fan_OnOff_FieldEnums.hxx> | ||
| 21 | #include <utilities/idd/Fan_SystemModel_FieldEnums.hxx> | ||
| 22 | #include <utilities/idd/Coil_Heating_DX_SingleSpeed_FieldEnums.hxx> | ||
| 23 | #include <utilities/idd/Coil_Heating_Fuel_FieldEnums.hxx> | ||
| 24 | #include <utilities/idd/Coil_Heating_Gas_MultiStage_FieldEnums.hxx> | ||
| 25 | #include <utilities/idd/Coil_Heating_Electric_MultiStage_FieldEnums.hxx> | ||
| 26 | #include <utilities/idd/Coil_Heating_Electric_FieldEnums.hxx> | ||
| 27 | #include <utilities/idd/Coil_Heating_Water_FieldEnums.hxx> | ||
| 28 | #include <utilities/idd/Coil_Heating_DX_MultiSpeed_FieldEnums.hxx> | ||
| 29 | #include <utilities/idd/Coil_Cooling_DX_MultiSpeed_FieldEnums.hxx> | ||
| 30 | #include "../../utilities/idd/IddEnums.hpp" | ||
| 31 | #include <utilities/idd/IddEnums.hxx> | ||
| 32 | #include <utilities/idd/IddFactory.hxx> | ||
| 33 | |||
| 34 | using namespace openstudio::model; | ||
| 35 | |||
| 36 | namespace openstudio { | ||
| 37 | |||
| 38 | namespace energyplus { | ||
| 39 | |||
| 40 | boost::optional<IdfObject> | ||
| 41 | 4 | ForwardTranslator::translateAirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed(AirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed& modelObject) { | |
| 42 | 4 | boost::optional<std::string> s; | |
| 43 | 4 | boost::optional<double> value; | |
| 44 | 4 | boost::optional<int> num; | |
| 45 | |||
| 46 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | IdfObject idfObject(IddObjectType::AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeed); |
| 47 | |||
| 48 |
1/1✓ Branch 1 taken 4 times.
|
4 | m_idfObjects.push_back(idfObject); |
| 49 | |||
| 50 | // Name | ||
| 51 |
3/3✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
|
4 | std::string baseName = modelObject.name().get(); |
| 52 |
1/1✓ Branch 1 taken 4 times.
|
4 | idfObject.setName(baseName); |
| 53 | |||
| 54 | // AvailabilityScheduleName | ||
| 55 |
2/3✓ Branch 1 taken 4 times.
✗ Branch 3 not taken.
✓ Branch 4 taken 4 times.
|
8 | if (boost::optional<Schedule> schedule = modelObject.availabilitySchedule()) { |
| 56 | ✗ | if (boost::optional<IdfObject> _schedule = translateAndMapModelObject(schedule.get())) { | |
| 57 | ✗ | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::AvailabilityScheduleName, _schedule->name().get()); | |
| 58 | ✗ | } | |
| 59 | 4 | } | |
| 60 | |||
| 61 | // AirInletNodeName | ||
| 62 | 4 | std::string airInletNodeName; | |
| 63 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
8 | if (boost::optional<ModelObject> mo = modelObject.inletModelObject()) { |
| 64 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 6 taken 4 times.
✗ Branch 7 not taken.
|
8 | if (boost::optional<Node> node = mo->optionalCast<Node>()) { |
| 65 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 8 taken 4 times.
✗ Branch 9 not taken.
|
8 | if ((s = node->name())) { |
| 66 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | airInletNodeName = s.get(); |
| 67 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::AirInletNodeName, s.get()); |
| 68 | } | ||
| 69 | 4 | } | |
| 70 | 4 | } | |
| 71 | |||
| 72 | // AirOutletNodeName | ||
| 73 | 4 | std::string airOutletNodeName; | |
| 74 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
8 | if (boost::optional<ModelObject> mo = modelObject.outletModelObject()) { |
| 75 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 6 taken 4 times.
✗ Branch 7 not taken.
|
8 | if (boost::optional<Node> node = mo->optionalCast<Node>()) { |
| 76 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 8 taken 4 times.
✗ Branch 9 not taken.
|
8 | if ((s = node->name())) { |
| 77 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | airOutletNodeName = s.get(); |
| 78 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::AirOutletNodeName, s.get()); |
| 79 | } | ||
| 80 | 4 | } | |
| 81 | 4 | } | |
| 82 | |||
| 83 | // DXHeatingCoilSizingRatio | ||
| 84 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((value = modelObject.dXHeatingCoilSizingRatio())) { |
| 85 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::DXHeatingCoilSizingRatio, value.get()); |
| 86 | } | ||
| 87 | |||
| 88 |
1/1✓ Branch 1 taken 4 times.
|
4 | HVACComponent coolingCoil = modelObject.coolingCoil(); |
| 89 |
1/1✓ Branch 1 taken 4 times.
|
4 | boost::optional<IdfObject> _coolingCoil = translateAndMapModelObject(coolingCoil); |
| 90 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_coolingCoil) { |
| 91 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingCoilObjectType, _coolingCoil->iddObject().name()); |
| 92 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingCoilName, _coolingCoil->name().get()); |
| 93 | } | ||
| 94 | |||
| 95 |
1/1✓ Branch 1 taken 4 times.
|
4 | HVACComponent heatingCoil = modelObject.heatingCoil(); |
| 96 |
1/1✓ Branch 1 taken 4 times.
|
4 | boost::optional<IdfObject> _heatingCoil = translateAndMapModelObject(heatingCoil); |
| 97 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_heatingCoil) { |
| 98 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingCoilObjectType, _heatingCoil->iddObject().name()); |
| 99 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingCoilName, _heatingCoil->name().get()); |
| 100 | } | ||
| 101 | |||
| 102 | // ControllingZoneorThermostatLocation | ||
| 103 |
2/3✓ Branch 1 taken 4 times.
✗ Branch 3 not taken.
✓ Branch 4 taken 4 times.
|
8 | if (boost::optional<ThermalZone> tz = modelObject.controllingZoneorThermostatLocation()) { |
| 104 | ✗ | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::ControllingZoneorThermostatLocation, tz->name().get()); | |
| 105 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
8 | } else if (auto airLoop = modelObject.airLoopHVAC()) { |
| 106 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | auto zones = airLoop->thermalZones(); |
| 107 |
1/2✗ Branch 1 not taken.
✓ Branch 2 taken 4 times.
|
4 | if (zones.size() == 1u) { |
| 108 | ✗ | if (auto zone = translateAndMapModelObject(zones.front())) { | |
| 109 | ✗ | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::ControllingZoneorThermostatLocation, zone->name().get()); | |
| 110 | ✗ | } | |
| 111 | } | ||
| 112 | 12 | } | |
| 113 | |||
| 114 | // SupplyAirFanName | ||
| 115 |
1/1✓ Branch 1 taken 4 times.
|
4 | HVACComponent fan = modelObject.supplyAirFan(); |
| 116 |
1/1✓ Branch 1 taken 4 times.
|
4 | boost::optional<IdfObject> _fan = translateAndMapModelObject(fan); |
| 117 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_fan) { |
| 118 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::SupplyAirFanObjectType, _fan->iddObject().name()); |
| 119 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::SupplyAirFanName, _fan->name().get()); |
| 120 | } | ||
| 121 | |||
| 122 | // SupplementalHeatingCoilName | ||
| 123 | 4 | boost::optional<IdfObject> _supplementalHeatingCoil; | |
| 124 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | boost::optional<HVACComponent> supplementalHeatingCoil = modelObject.supplementalHeatingCoil(); |
| 125 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (supplementalHeatingCoil) { |
| 126 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _supplementalHeatingCoil = translateAndMapModelObject(supplementalHeatingCoil.get()); |
| 127 | } | ||
| 128 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_supplementalHeatingCoil) { |
| 129 |
1/1✓ Branch 1 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::SupplementalHeatingCoilObjectType, |
| 130 |
3/3✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
|
8 | _supplementalHeatingCoil->iddObject().name()); |
| 131 | |||
| 132 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::SupplementalHeatingCoilName, _supplementalHeatingCoil->name().get()); |
| 133 | } | ||
| 134 | |||
| 135 | // FanPlacement | ||
| 136 | 4 | bool t_blowThrough = true; | |
| 137 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 8 taken 4 times.
✗ Branch 9 not taken.
|
8 | if ((s = modelObject.supplyAirFanPlacement())) { |
| 138 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::SupplyAirFanPlacement, s.get()); |
| 139 |
4/5✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✗ Branch 11 not taken.
|
8 | if (istringEqual(s.get(), "DrawThrough")) { |
| 140 | 4 | t_blowThrough = false; | |
| 141 | } | ||
| 142 | } | ||
| 143 | |||
| 144 | // SupplyAirFanOperatingModeScheduleName | ||
| 145 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 8 taken 4 times.
✗ Branch 9 not taken.
|
8 | if (boost::optional<Schedule> schedule = modelObject.supplyAirFanOperatingModeSchedule()) { |
| 146 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | boost::optional<IdfObject> _schedule = translateAndMapModelObject(schedule.get()); |
| 147 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_schedule) { |
| 148 |
4/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
|
4 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::SupplyAirFanOperatingModeScheduleName, _schedule->name().get()); |
| 149 | } | ||
| 150 | 8 | } | |
| 151 | |||
| 152 | // MaximumSupplyAirTemperaturefromSupplementalHeater | ||
| 153 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isMaximumSupplyAirTemperaturefromSupplementalHeaterAutosized()) { |
| 154 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::MaximumSupplyAirTemperaturefromSupplementalHeater, "AutoSize"); |
| 155 | ✗ | } else if ((value = modelObject.maximumSupplyAirTemperaturefromSupplementalHeater())) { | |
| 156 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::MaximumSupplyAirTemperaturefromSupplementalHeater, value.get()); | |
| 157 | } | ||
| 158 | |||
| 159 | // MaximumOutdoorDryBulbTemperatureforSupplementalHeaterOperation | ||
| 160 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((value = modelObject.maximumOutdoorDryBulbTemperatureforSupplementalHeaterOperation())) { |
| 161 | 4 | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::MaximumOutdoorDryBulbTemperatureforSupplementalHeaterOperation, | |
| 162 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | value.get()); |
| 163 | } | ||
| 164 | |||
| 165 | // AuxiliaryOnCycleElectricPower | ||
| 166 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((value = modelObject.auxiliaryOnCycleElectricPower())) { |
| 167 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::AuxiliaryOnCycleElectricPower, value.get()); |
| 168 | } | ||
| 169 | |||
| 170 | // AuxiliaryOffCycleElectricPower | ||
| 171 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((value = modelObject.auxiliaryOffCycleElectricPower())) { |
| 172 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::AuxiliaryOffCycleElectricPower, value.get()); |
| 173 | } | ||
| 174 | |||
| 175 | // DesignHeatRecoveryWaterFlowRate | ||
| 176 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((value = modelObject.designHeatRecoveryWaterFlowRate())) { |
| 177 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::DesignHeatRecoveryWaterFlowRate, value.get()); |
| 178 | } | ||
| 179 | |||
| 180 | // MaximumTemperatureforHeatRecovery | ||
| 181 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((value = modelObject.maximumTemperatureforHeatRecovery())) { |
| 182 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::MaximumTemperatureforHeatRecovery, value.get()); |
| 183 | } | ||
| 184 | |||
| 185 | // HeatRecoveryWaterInletNodeName | ||
| 186 | |||
| 187 | // HeatRecoveryWaterOutletNodeName | ||
| 188 | |||
| 189 | // SupplyAirFlowRateWhenNoCoolingorHeatingisNeeded | ||
| 190 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSupplyAirFlowRateWhenNoCoolingorHeatingisNeededAutosized()) { |
| 191 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::NoLoadSupplyAirFlowRate, "AutoSize"); |
| 192 | ✗ | } else if ((value = modelObject.supplyAirFlowRateWhenNoCoolingorHeatingisNeeded())) { | |
| 193 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::NoLoadSupplyAirFlowRate, value.get()); | |
| 194 | } | ||
| 195 | |||
| 196 | // NumberofSpeedsforHeating | ||
| 197 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((num = modelObject.numberofSpeedsforHeating())) { |
| 198 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setInt(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::NumberofSpeedsforHeating, num.get()); |
| 199 | } | ||
| 200 | |||
| 201 | // NumberofSpeedsforCooling | ||
| 202 |
3/4✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✗ Branch 8 not taken.
|
8 | if ((num = modelObject.numberofSpeedsforCooling())) { |
| 203 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | idfObject.setInt(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::NumberofSpeedsforCooling, num.get()); |
| 204 | } | ||
| 205 | |||
| 206 | // Speed1SupplyAirFlowRateDuringHeatingOperation | ||
| 207 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed1SupplyAirFlowRateDuringHeatingOperationAutosized()) { |
| 208 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed1SupplyAirFlowRate, "AutoSize"); |
| 209 | ✗ | } else if ((value = modelObject.speed1SupplyAirFlowRateDuringHeatingOperation())) { | |
| 210 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed1SupplyAirFlowRate, value.get()); | |
| 211 | } | ||
| 212 | |||
| 213 | // Speed2SupplyAirFlowRateDuringHeatingOperation | ||
| 214 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed2SupplyAirFlowRateDuringHeatingOperationAutosized()) { |
| 215 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed2SupplyAirFlowRate, "AutoSize"); |
| 216 | ✗ | } else if ((value = modelObject.speed2SupplyAirFlowRateDuringHeatingOperation())) { | |
| 217 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed2SupplyAirFlowRate, value.get()); | |
| 218 | } | ||
| 219 | |||
| 220 | // Speed3SupplyAirFlowRateDuringHeatingOperation | ||
| 221 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed3SupplyAirFlowRateDuringHeatingOperationAutosized()) { |
| 222 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed3SupplyAirFlowRate, "AutoSize"); |
| 223 | ✗ | } else if ((value = modelObject.speed3SupplyAirFlowRateDuringHeatingOperation())) { | |
| 224 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed3SupplyAirFlowRate, value.get()); | |
| 225 | } | ||
| 226 | |||
| 227 | // Speed4SupplyAirFlowRateDuringHeatingOperation | ||
| 228 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed4SupplyAirFlowRateDuringHeatingOperationAutosized()) { |
| 229 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed4SupplyAirFlowRate, "AutoSize"); |
| 230 | ✗ | } else if ((value = modelObject.speed4SupplyAirFlowRateDuringHeatingOperation())) { | |
| 231 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::HeatingSpeed4SupplyAirFlowRate, value.get()); | |
| 232 | } | ||
| 233 | |||
| 234 | // Speed1SupplyAirFlowRateDuringCoolingOperation | ||
| 235 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed1SupplyAirFlowRateDuringCoolingOperationAutosized()) { |
| 236 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed1SupplyAirFlowRate, "AutoSize"); |
| 237 | ✗ | } else if ((value = modelObject.speed1SupplyAirFlowRateDuringCoolingOperation())) { | |
| 238 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed1SupplyAirFlowRate, value.get()); | |
| 239 | } | ||
| 240 | |||
| 241 | // Speed2SupplyAirFlowRateDuringCoolingOperation | ||
| 242 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed2SupplyAirFlowRateDuringCoolingOperationAutosized()) { |
| 243 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed2SupplyAirFlowRate, "AutoSize"); |
| 244 | ✗ | } else if ((value = modelObject.speed2SupplyAirFlowRateDuringCoolingOperation())) { | |
| 245 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed2SupplyAirFlowRate, value.get()); | |
| 246 | } | ||
| 247 | |||
| 248 | // Speed3SupplyAirFlowRateDuringCoolingOperation | ||
| 249 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed3SupplyAirFlowRateDuringCoolingOperationAutosized()) { |
| 250 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed3SupplyAirFlowRate, "AutoSize"); |
| 251 | ✗ | } else if ((value = modelObject.speed3SupplyAirFlowRateDuringCoolingOperation())) { | |
| 252 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed3SupplyAirFlowRate, value.get()); | |
| 253 | } | ||
| 254 | |||
| 255 | // Speed4SupplyAirFlowRateDuringCoolingOperation | ||
| 256 |
2/3✓ Branch 1 taken 4 times.
✓ Branch 3 taken 4 times.
✗ Branch 4 not taken.
|
4 | if (modelObject.isSpeed4SupplyAirFlowRateDuringCoolingOperationAutosized()) { |
| 257 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
8 | idfObject.setString(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed4SupplyAirFlowRate, "AutoSize"); |
| 258 | ✗ | } else if ((value = modelObject.speed4SupplyAirFlowRateDuringCoolingOperation())) { | |
| 259 | ✗ | idfObject.setDouble(AirLoopHVAC_UnitaryHeatPump_AirToAir_MultiSpeedFields::CoolingSpeed4SupplyAirFlowRate, value.get()); | |
| 260 | } | ||
| 261 | |||
| 262 | 4 | std::string fanOutletNodeName; | |
| 263 | 4 | std::string fanInletNodeName; | |
| 264 | 4 | std::string coolingCoilOutletNodeName; | |
| 265 | 4 | std::string coolingCoilInletNodeName; | |
| 266 | 4 | std::string heatingCoilOutletNodeName; | |
| 267 | 4 | std::string heatingCoilInletNodeName; | |
| 268 | 4 | std::string suppCoilOutletNodeName; | |
| 269 | 4 | std::string suppCoilInletNodeName; | |
| 270 | |||
| 271 |
1/2✗ Branch 0 not taken.
✓ Branch 1 taken 4 times.
|
4 | if (t_blowThrough) { |
| 272 | ✗ | fanInletNodeName = airInletNodeName; | |
| 273 | ✗ | fanOutletNodeName = baseName + " Fan Outlet"; | |
| 274 | |||
| 275 | ✗ | coolingCoilInletNodeName = fanOutletNodeName; | |
| 276 | ✗ | coolingCoilOutletNodeName = baseName + " Cool Coil Outlet"; | |
| 277 | |||
| 278 | ✗ | heatingCoilInletNodeName = coolingCoilOutletNodeName; | |
| 279 | ✗ | heatingCoilOutletNodeName = baseName + " Heat Coil Outlet"; | |
| 280 | |||
| 281 | ✗ | suppCoilInletNodeName = heatingCoilOutletNodeName; | |
| 282 | ✗ | suppCoilOutletNodeName = airOutletNodeName; | |
| 283 | } else { | ||
| 284 |
1/1✓ Branch 1 taken 4 times.
|
4 | coolingCoilInletNodeName = airInletNodeName; |
| 285 |
1/1✓ Branch 1 taken 4 times.
|
4 | coolingCoilOutletNodeName = baseName + " Cool Coil Outlet"; |
| 286 | |||
| 287 |
1/1✓ Branch 1 taken 4 times.
|
4 | heatingCoilInletNodeName = coolingCoilOutletNodeName; |
| 288 |
1/1✓ Branch 1 taken 4 times.
|
4 | heatingCoilOutletNodeName = baseName + " Heat Coil Outlet"; |
| 289 | |||
| 290 |
1/1✓ Branch 1 taken 4 times.
|
4 | fanInletNodeName = heatingCoilOutletNodeName; |
| 291 |
1/1✓ Branch 1 taken 4 times.
|
4 | fanOutletNodeName = baseName + " Fan Outlet"; |
| 292 | |||
| 293 |
1/1✓ Branch 1 taken 4 times.
|
4 | suppCoilInletNodeName = fanOutletNodeName; |
| 294 |
1/1✓ Branch 1 taken 4 times.
|
4 | suppCoilOutletNodeName = airOutletNodeName; |
| 295 | } | ||
| 296 | |||
| 297 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_fan) { |
| 298 |
5/6✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✓ Branch 14 taken 4 times.
✗ Branch 15 not taken.
|
4 | if (_fan->iddObject().type() == IddObjectType::Fan_ConstantVolume) { |
| 299 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _fan->setString(Fan_ConstantVolumeFields::AirInletNodeName, fanInletNodeName); |
| 300 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _fan->setString(Fan_ConstantVolumeFields::AirOutletNodeName, fanOutletNodeName); |
| 301 | ✗ | } else if (_fan->iddObject().type() == IddObjectType::Fan_OnOff) { | |
| 302 | ✗ | _fan->setString(Fan_OnOffFields::AirInletNodeName, fanInletNodeName); | |
| 303 | ✗ | _fan->setString(Fan_OnOffFields::AirOutletNodeName, fanOutletNodeName); | |
| 304 | ✗ | } else if (_fan->iddObject().type() == IddObjectType::Fan_SystemModel) { | |
| 305 | // This isn't supported by E+ right now | ||
| 306 | ✗ | _fan->setString(Fan_SystemModelFields::AirInletNodeName, fanInletNodeName); | |
| 307 | ✗ | _fan->setString(Fan_SystemModelFields::AirOutletNodeName, fanOutletNodeName); | |
| 308 | ✗ | OS_ASSERT(false); | |
| 309 | } | ||
| 310 | } | ||
| 311 | |||
| 312 |
1/1✓ Branch 1 taken 4 times.
|
4 | fixSPMsForUnitarySystem(modelObject, fanInletNodeName, fanOutletNodeName); |
| 313 | |||
| 314 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_coolingCoil) { |
| 315 |
5/6✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✓ Branch 14 taken 4 times.
✗ Branch 15 not taken.
|
4 | if (_coolingCoil->iddObject().type() == IddObjectType::Coil_Cooling_DX_MultiSpeed) { |
| 316 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _coolingCoil->setString(Coil_Cooling_DX_MultiSpeedFields::AirInletNodeName, coolingCoilInletNodeName); |
| 317 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _coolingCoil->setString(Coil_Cooling_DX_MultiSpeedFields::AirOutletNodeName, coolingCoilOutletNodeName); |
| 318 | } | ||
| 319 | } | ||
| 320 | |||
| 321 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_heatingCoil) { |
| 322 |
6/6✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✓ Branch 14 taken 2 times.
✓ Branch 15 taken 2 times.
|
4 | if (_heatingCoil->iddObject().type() == IddObjectType::Coil_Heating_Gas_MultiStage) { |
| 323 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | _heatingCoil->setString(Coil_Heating_Gas_MultiStageFields::AirInletNodeName, heatingCoilInletNodeName); |
| 324 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | _heatingCoil->setString(Coil_Heating_Gas_MultiStageFields::AirOutletNodeName, heatingCoilOutletNodeName); |
| 325 |
5/6✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
✓ Branch 14 taken 2 times.
✗ Branch 15 not taken.
|
2 | } else if (_heatingCoil->iddObject().type() == IddObjectType::Coil_Heating_Electric_MultiStage) { |
| 326 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | _heatingCoil->setString(Coil_Heating_Electric_MultiStageFields::AirInletNodeName, heatingCoilInletNodeName); |
| 327 |
2/2✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
|
2 | _heatingCoil->setString(Coil_Heating_Electric_MultiStageFields::AirOutletNodeName, heatingCoilOutletNodeName); |
| 328 | ✗ | } else if (_heatingCoil->iddObject().type() == IddObjectType::Coil_Heating_Water) { | |
| 329 | ✗ | _heatingCoil->setString(Coil_Heating_WaterFields::AirInletNodeName, heatingCoilInletNodeName); | |
| 330 | ✗ | _heatingCoil->setString(Coil_Heating_WaterFields::AirOutletNodeName, heatingCoilOutletNodeName); | |
| 331 | ✗ | } else if (_heatingCoil->iddObject().type() == IddObjectType::Coil_Heating_DX_MultiSpeed) { | |
| 332 | ✗ | _heatingCoil->setString(Coil_Heating_DX_MultiSpeedFields::AirInletNodeName, heatingCoilInletNodeName); | |
| 333 | ✗ | _heatingCoil->setString(Coil_Heating_DX_MultiSpeedFields::AirOutletNodeName, heatingCoilOutletNodeName); | |
| 334 | } | ||
| 335 | } | ||
| 336 | |||
| 337 |
1/2✓ Branch 0 taken 4 times.
✗ Branch 1 not taken.
|
4 | if (_supplementalHeatingCoil) { |
| 338 |
5/6✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✗ Branch 14 not taken.
✓ Branch 15 taken 4 times.
|
4 | if (_supplementalHeatingCoil->iddObject().type() == IddObjectType::Coil_Heating_Water) { |
| 339 | ✗ | _supplementalHeatingCoil->setString(Coil_Heating_WaterFields::AirInletNodeName, suppCoilInletNodeName); | |
| 340 | ✗ | _supplementalHeatingCoil->setString(Coil_Heating_WaterFields::AirOutletNodeName, suppCoilOutletNodeName); | |
| 341 |
5/6✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✗ Branch 14 not taken.
✓ Branch 15 taken 4 times.
|
4 | } else if (_supplementalHeatingCoil->iddObject().type() == IddObjectType::Coil_Heating_Fuel) { |
| 342 | ✗ | _supplementalHeatingCoil->setString(Coil_Heating_FuelFields::AirInletNodeName, suppCoilInletNodeName); | |
| 343 | ✗ | _supplementalHeatingCoil->setString(Coil_Heating_FuelFields::AirOutletNodeName, suppCoilOutletNodeName); | |
| 344 |
5/6✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
✓ Branch 7 taken 4 times.
✓ Branch 10 taken 4 times.
✓ Branch 14 taken 4 times.
✗ Branch 15 not taken.
|
4 | } else if (_supplementalHeatingCoil->iddObject().type() == IddObjectType::Coil_Heating_Electric) { |
| 345 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _supplementalHeatingCoil->setString(Coil_Heating_ElectricFields::AirInletNodeName, suppCoilInletNodeName); |
| 346 |
2/2✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
|
4 | _supplementalHeatingCoil->setString(Coil_Heating_ElectricFields::AirOutletNodeName, suppCoilOutletNodeName); |
| 347 | } | ||
| 348 | } | ||
| 349 | |||
| 350 |
1/1✓ Branch 1 taken 4 times.
|
8 | return idfObject; |
| 351 | 4 | } | |
| 352 | |||
| 353 | } // namespace energyplus | ||
| 354 | |||
| 355 | } // namespace openstudio | ||
| 356 |