src/energyplus/ForwardTranslator/ForwardTranslateWaterHeaterHeatPumpWrappedCondenser.cpp
| Line | Branch | Exec | Source |
|---|---|---|---|
| 1 | /*********************************************************************************************************************** | ||
| 2 | * OpenStudio(R), Copyright (c) Alliance for Energy Innovation, LLC. | ||
| 3 | * See also https://openstudio.net/license | ||
| 4 | ***********************************************************************************************************************/ | ||
| 5 | |||
| 6 | #include "../ForwardTranslator.hpp" | ||
| 7 | #include "../../model/WaterHeaterHeatPumpWrappedCondenser.hpp" | ||
| 8 | #include "../../model/WaterHeaterHeatPumpWrappedCondenser_Impl.hpp" | ||
| 9 | #include "../../model/WaterHeaterMixed.hpp" | ||
| 10 | #include "../../model/WaterHeaterMixed_Impl.hpp" | ||
| 11 | #include "../../model/WaterHeaterStratified.hpp" | ||
| 12 | #include "../../model/WaterHeaterStratified_Impl.hpp" | ||
| 13 | #include "../../model/CoilWaterHeatingAirToWaterHeatPumpWrapped.hpp" | ||
| 14 | #include "../../model/CoilWaterHeatingAirToWaterHeatPumpWrapped_Impl.hpp" | ||
| 15 | #include "../../model/Model.hpp" | ||
| 16 | #include "../../model/Schedule.hpp" | ||
| 17 | #include "../../model/Schedule_Impl.hpp" | ||
| 18 | #include "../../model/Curve.hpp" | ||
| 19 | #include "../../model/Curve_Impl.hpp" | ||
| 20 | #include "../../model/ThermalZone.hpp" | ||
| 21 | #include "../../model/ThermalZone_Impl.hpp" | ||
| 22 | #include "../../model/Node.hpp" | ||
| 23 | #include "../../model/Node_Impl.hpp" | ||
| 24 | #include "../../utilities/core/Assert.hpp" | ||
| 25 | #include <utilities/idd/WaterHeater_HeatPump_WrappedCondenser_FieldEnums.hxx> | ||
| 26 | #include <utilities/idd/Coil_WaterHeating_AirToWaterHeatPump_Wrapped_FieldEnums.hxx> | ||
| 27 | #include <utilities/idd/WaterHeater_Mixed_FieldEnums.hxx> | ||
| 28 | #include <utilities/idd/WaterHeater_Stratified_FieldEnums.hxx> | ||
| 29 | #include <utilities/idd/Fan_OnOff_FieldEnums.hxx> | ||
| 30 | #include <utilities/idd/Fan_SystemModel_FieldEnums.hxx> | ||
| 31 | #include <utilities/idd/IddEnums.hxx> | ||
| 32 | |||
| 33 | using namespace openstudio::model; | ||
| 34 | using namespace std; | ||
| 35 | |||
| 36 | namespace openstudio { | ||
| 37 | |||
| 38 | namespace energyplus { | ||
| 39 | |||
| 40 | 3 | boost::optional<IdfObject> ForwardTranslator::translateWaterHeaterHeatPumpWrappedCondenser(WaterHeaterHeatPumpWrappedCondenser& modelObject) { | |
| 41 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | IdfObject idfObject(IddObjectType::WaterHeater_HeatPump_WrappedCondenser); |
| 42 |
1/1✓ Branch 1 taken 3 times.
|
3 | m_idfObjects.push_back(idfObject); |
| 43 | |||
| 44 | // Name | ||
| 45 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto s = modelObject.name()) { |
| 46 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idfObject.setName(*s); |
| 47 | 3 | } | |
| 48 | |||
| 49 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto tank = modelObject.tank(); |
| 50 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto stratifiedTank = tank.optionalCast<model::WaterHeaterStratified>(); |
| 51 | |||
| 52 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto height = modelObject.controlSensor1HeightInStratifiedTank()) { |
| 53 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::ControlSensor1HeightInStratifiedTank, height.get()); |
| 54 | } else { | ||
| 55 | ✗ | if (stratifiedTank) { | |
| 56 | ✗ | auto heater1Height = stratifiedTank->heater1Height(); | |
| 57 | ✗ | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::ControlSensor1HeightInStratifiedTank, heater1Height); | |
| 58 | } | ||
| 59 | } | ||
| 60 | |||
| 61 | { | ||
| 62 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.controlSensor1Weight(); |
| 63 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::ControlSensor1Weight, value); |
| 64 | } | ||
| 65 | |||
| 66 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto height = modelObject.controlSensor2HeightInStratifiedTank()) { |
| 67 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::ControlSensor2HeightInStratifiedTank, height.get()); |
| 68 | } else { | ||
| 69 | ✗ | if (stratifiedTank) { | |
| 70 | ✗ | auto heater2Height = stratifiedTank->heater2Height(); | |
| 71 | ✗ | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::ControlSensor2HeightInStratifiedTank, heater2Height); | |
| 72 | } | ||
| 73 | } | ||
| 74 | |||
| 75 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto schedule = modelObject.availabilitySchedule()) { |
| 76 |
3/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 6 taken 3 times.
✗ Branch 7 not taken.
|
6 | if (auto _schedule = translateAndMapModelObject(schedule.get())) { |
| 77 |
3/3✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::AvailabilityScheduleName, _schedule->nameString()); |
| 78 | 3 | } | |
| 79 | 3 | } | |
| 80 | |||
| 81 | { | ||
| 82 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto schedule = modelObject.compressorSetpointTemperatureSchedule(); |
| 83 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto _schedule = translateAndMapModelObject(schedule)) { |
| 84 |
3/3✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::CompressorSetpointTemperatureScheduleName, _schedule->nameString()); |
| 85 | 3 | } | |
| 86 | 3 | } | |
| 87 | |||
| 88 | { | ||
| 89 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.deadBandTemperatureDifference(); |
| 90 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::DeadBandTemperatureDifference, value); |
| 91 | } | ||
| 92 | |||
| 93 | { | ||
| 94 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.condenserBottomLocation(); |
| 95 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::CondenserBottomLocation, value); |
| 96 | } | ||
| 97 | |||
| 98 | { | ||
| 99 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.condenserTopLocation(); |
| 100 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::CondenserTopLocation, value); |
| 101 | } | ||
| 102 | |||
| 103 | { | ||
| 104 |
2/3✓ Branch 1 taken 3 times.
✗ Branch 3 not taken.
✓ Branch 4 taken 3 times.
|
3 | if (modelObject.isEvaporatorAirFlowRateAutocalculated()) { |
| 105 | ✗ | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::EvaporatorAirFlowRate, "Autocalculate"); | |
| 106 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | } else if (auto value = modelObject.evaporatorAirFlowRate()) { |
| 107 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::EvaporatorAirFlowRate, value.get()); |
| 108 | } | ||
| 109 | } | ||
| 110 | |||
| 111 | // Logic is in model namespace for these two for EMS, cf #5547 | ||
| 112 |
1/1✓ Branch 1 taken 3 times.
|
3 | std::string airInletNodeName = modelObject.airInletNodeName(); |
| 113 |
1/1✓ Branch 1 taken 3 times.
|
3 | std::string airOutletNodeName = modelObject.airOutletNodeName(); |
| 114 | |||
| 115 | 3 | std::string outdoorAirNodeName; | |
| 116 | 3 | std::string exhaustAirNodeName; | |
| 117 | 3 | std::string inletAirZoneName; | |
| 118 | 3 | std::string inletAirMixerNodeName; | |
| 119 | 3 | std::string outletAirSplitterNodeName; | |
| 120 | 3 | std::string fanInletNodeName; | |
| 121 | 3 | std::string fanOutletNodeName; | |
| 122 | 3 | std::string evapInletNodeName; | |
| 123 | 3 | std::string evapOutletNodeName; | |
| 124 | |||
| 125 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto inletAirConfiguration = modelObject.inletAirConfiguration(); |
| 126 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::InletAirConfiguration, inletAirConfiguration); |
| 127 | |||
| 128 |
4/5✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 11 taken 3 times.
✗ Branch 12 not taken.
|
6 | if (istringEqual(modelObject.fanPlacement(), "DrawThrough")) { |
| 129 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
6 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::FanPlacement, "DrawThrough"); |
| 130 | |||
| 131 | // Depending on inletAirConfiguration, what this returns will be different | ||
| 132 | // * "ZoneAirOnly" and "ZoneAndOutdoorAir" need to get nodes from the thermal zone | ||
| 133 | // * "OutdoorAirOnly" and "Schedule", it just constructs a node name. | ||
| 134 | // This is helpful if you need to control this via EMS | ||
| 135 |
4/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 2 times.
✓ Branch 8 taken 1 time.
|
6 | if (istringEqual(inletAirConfiguration, "ZoneAirOnly")) { |
| 136 |
2/3✓ Branch 1 taken 2 times.
✓ Branch 3 taken 2 times.
✗ Branch 4 not taken.
|
4 | if (auto thermalZone = modelObject.thermalZone()) { |
| 137 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | inletAirZoneName = thermalZone->name().get(); |
| 138 |
3/3✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
|
2 | fanInletNodeName = modelObject.name().get() + " Evap Outlet - Fan Inlet"; |
| 139 |
1/1✓ Branch 1 taken 2 times.
|
2 | fanOutletNodeName = airOutletNodeName; |
| 140 |
1/1✓ Branch 1 taken 2 times.
|
2 | evapInletNodeName = airInletNodeName; |
| 141 |
1/1✓ Branch 1 taken 2 times.
|
2 | evapOutletNodeName = fanInletNodeName; |
| 142 | 2 | } | |
| 143 |
3/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✗ Branch 7 not taken.
✓ Branch 8 taken 1 time.
|
2 | } else if (istringEqual(inletAirConfiguration, "ZoneAndOutdoorAir")) { |
| 144 | ✗ | if (auto thermalZone = modelObject.thermalZone()) { | |
| 145 | ✗ | outdoorAirNodeName = modelObject.name().get() + " Outdoor Air"; | |
| 146 | ✗ | exhaustAirNodeName = modelObject.name().get() + " Exhaust Air"; | |
| 147 | ✗ | inletAirZoneName = thermalZone->name().get(); | |
| 148 | ✗ | inletAirMixerNodeName = modelObject.name().get() + " Mixer Outlet - Evap Inlet"; | |
| 149 | ✗ | outletAirSplitterNodeName = modelObject.name().get() + " Fan Outlet - Splitter Inlet"; | |
| 150 | ✗ | fanInletNodeName = modelObject.name().get() + " Evap Outlet - Fan Inlet"; | |
| 151 | ✗ | fanOutletNodeName = outletAirSplitterNodeName; | |
| 152 | ✗ | evapInletNodeName = inletAirMixerNodeName; | |
| 153 | ✗ | evapOutletNodeName = fanInletNodeName; | |
| 154 | ✗ | } | |
| 155 |
3/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✗ Branch 7 not taken.
✓ Branch 8 taken 1 time.
|
2 | } else if (istringEqual(inletAirConfiguration, "OutdoorAirOnly")) { |
| 156 | ✗ | outdoorAirNodeName = modelObject.name().get() + " Outdoor Air"; | |
| 157 | ✗ | exhaustAirNodeName = modelObject.name().get() + " Exhaust Air"; | |
| 158 | ✗ | fanInletNodeName = modelObject.name().get() + " Evap Outlet - Fan Inlet"; | |
| 159 | ✗ | fanOutletNodeName = exhaustAirNodeName; | |
| 160 | ✗ | evapInletNodeName = outdoorAirNodeName; | |
| 161 | ✗ | evapOutletNodeName = fanInletNodeName; | |
| 162 |
3/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✗ Branch 8 not taken.
|
2 | } else if (istringEqual(inletAirConfiguration, "Schedule")) { |
| 163 |
3/3✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
|
1 | fanInletNodeName = modelObject.name().get() + " Evap Outlet - Fan Inlet"; |
| 164 |
1/1✓ Branch 1 taken 1 time.
|
1 | fanOutletNodeName = airOutletNodeName; |
| 165 |
1/1✓ Branch 1 taken 1 time.
|
1 | evapInletNodeName = airInletNodeName; |
| 166 |
1/1✓ Branch 1 taken 1 time.
|
1 | evapOutletNodeName = fanInletNodeName; |
| 167 | } | ||
| 168 | |||
| 169 | } else { // BlowThrough | ||
| 170 | ✗ | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::FanPlacement, "BlowThrough"); | |
| 171 | |||
| 172 | ✗ | if (istringEqual(inletAirConfiguration, "ZoneAirOnly")) { | |
| 173 | ✗ | if (auto thermalZone = modelObject.thermalZone()) { | |
| 174 | ✗ | inletAirZoneName = thermalZone->name().get(); | |
| 175 | ✗ | fanInletNodeName = airInletNodeName; | |
| 176 | ✗ | fanOutletNodeName = modelObject.name().get() + " Fan Outlet - Evap Inlet"; | |
| 177 | ✗ | evapInletNodeName = fanOutletNodeName; | |
| 178 | ✗ | evapOutletNodeName = airOutletNodeName; | |
| 179 | ✗ | } | |
| 180 | ✗ | } else if (istringEqual(inletAirConfiguration, "ZoneAndOutdoorAir")) { | |
| 181 | ✗ | if (auto thermalZone = modelObject.thermalZone()) { | |
| 182 | ✗ | outdoorAirNodeName = modelObject.name().get() + " Outdoor Air"; | |
| 183 | ✗ | exhaustAirNodeName = modelObject.name().get() + " Exhaust Air"; | |
| 184 | ✗ | inletAirZoneName = thermalZone->name().get(); | |
| 185 | ✗ | inletAirMixerNodeName = modelObject.name().get() + " Mixer Outlet - Fan Inlet"; | |
| 186 | ✗ | outletAirSplitterNodeName = modelObject.name().get() + " Evap Outlet - Splitter Inlet"; | |
| 187 | ✗ | fanInletNodeName = inletAirMixerNodeName; | |
| 188 | ✗ | fanOutletNodeName = modelObject.name().get() + " Fan Outlet - Evap Inlet"; | |
| 189 | ✗ | evapInletNodeName = fanOutletNodeName; | |
| 190 | ✗ | evapOutletNodeName = outletAirSplitterNodeName; | |
| 191 | ✗ | } | |
| 192 | ✗ | } else if (istringEqual(inletAirConfiguration, "OutdoorAirOnly")) { | |
| 193 | ✗ | outdoorAirNodeName = modelObject.name().get() + " Outdoor Air"; | |
| 194 | ✗ | exhaustAirNodeName = modelObject.name().get() + " Exhaust Air"; | |
| 195 | ✗ | fanInletNodeName = outdoorAirNodeName; | |
| 196 | ✗ | fanOutletNodeName = modelObject.name().get() + " Fan Outlet - Evap Inlet"; | |
| 197 | ✗ | evapInletNodeName = fanOutletNodeName; | |
| 198 | ✗ | evapOutletNodeName = exhaustAirNodeName; | |
| 199 | ✗ | } else if (istringEqual(inletAirConfiguration, "Schedule")) { | |
| 200 | ✗ | fanInletNodeName = airInletNodeName; | |
| 201 | ✗ | fanOutletNodeName = modelObject.name().get() + " Fan Outlet - Evap Inlet"; | |
| 202 | ✗ | evapInletNodeName = fanOutletNodeName; | |
| 203 | ✗ | evapOutletNodeName = airOutletNodeName; | |
| 204 | } | ||
| 205 | } | ||
| 206 | |||
| 207 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::AirInletNodeName, airInletNodeName); |
| 208 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::AirOutletNodeName, airOutletNodeName); |
| 209 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::OutdoorAirNodeName, outdoorAirNodeName); |
| 210 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::ExhaustAirNodeName, exhaustAirNodeName); |
| 211 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::InletAirZoneName, inletAirZoneName); |
| 212 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::InletAirMixerNodeName, inletAirMixerNodeName); |
| 213 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::OutletAirSplitterNodeName, outletAirSplitterNodeName); |
| 214 | |||
| 215 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto schedule = modelObject.inletAirTemperatureSchedule()) { |
| 216 |
3/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 6 taken 3 times.
✗ Branch 7 not taken.
|
6 | if (auto _schedule = translateAndMapModelObject(schedule.get())) { |
| 217 |
3/3✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::InletAirTemperatureScheduleName, _schedule->nameString()); |
| 218 | 3 | } | |
| 219 | 3 | } | |
| 220 | |||
| 221 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto schedule = modelObject.inletAirHumiditySchedule()) { |
| 222 |
3/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 6 taken 3 times.
✗ Branch 7 not taken.
|
6 | if (auto _schedule = translateAndMapModelObject(schedule.get())) { |
| 223 |
3/3✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::InletAirHumidityScheduleName, _schedule->nameString()); |
| 224 | 3 | } | |
| 225 | 3 | } | |
| 226 | |||
| 227 | { | ||
| 228 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto mo = modelObject.tank(); |
| 229 |
3/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 2 times.
✓ Branch 4 taken 1 time.
|
6 | if (auto idf = translateAndMapModelObject(mo)) { |
| 230 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankName, idf->name().get()); |
| 231 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankObjectType, idf->iddObject().name()); |
| 232 |
3/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✗ Branch 7 not taken.
✓ Branch 8 taken 2 times.
|
2 | if (mo.iddObjectType() == model::WaterHeaterMixed::iddObjectType()) { |
| 233 | ✗ | auto waterHeaterMixed = mo.cast<model::WaterHeaterMixed>(); | |
| 234 | ✗ | if (auto node = waterHeaterMixed.supplyInletModelObject()) { | |
| 235 | ✗ | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankUseSideInletNodeName, node->name().get()); | |
| 236 | ✗ | } | |
| 237 | ✗ | if (auto node = waterHeaterMixed.supplyOutletModelObject()) { | |
| 238 | ✗ | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankUseSideOutletNodeName, node->name().get()); | |
| 239 | ✗ | } | |
| 240 |
3/4✓ Branch 2 taken 2 times.
✓ Branch 5 taken 2 times.
✓ Branch 8 taken 2 times.
✗ Branch 9 not taken.
|
2 | } else if (mo.iddObjectType() == model::WaterHeaterStratified::iddObjectType()) { |
| 241 |
1/1✓ Branch 1 taken 2 times.
|
2 | auto waterHeaterStratified = mo.cast<model::WaterHeaterStratified>(); |
| 242 |
2/3✓ Branch 1 taken 2 times.
✓ Branch 3 taken 2 times.
✗ Branch 4 not taken.
|
4 | if (auto node = waterHeaterStratified.supplyInletModelObject()) { |
| 243 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankUseSideInletNodeName, node->name().get()); |
| 244 | 2 | } | |
| 245 |
2/3✓ Branch 1 taken 2 times.
✓ Branch 3 taken 2 times.
✗ Branch 4 not taken.
|
4 | if (auto node = waterHeaterStratified.supplyOutletModelObject()) { |
| 246 |
4/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
✓ Branch 10 taken 2 times.
|
2 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankUseSideOutletNodeName, node->name().get()); |
| 247 | 2 | } | |
| 248 | 2 | } else { | |
| 249 | ✗ | LOG(Error, modelObject.briefDescription() << " is attached to an unsupported type of tank: " << mo.briefDescription()); | |
| 250 | } | ||
| 251 | 3 | } | |
| 252 | 3 | } | |
| 253 | |||
| 254 | { | ||
| 255 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto mo = modelObject.dXCoil(); |
| 256 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto idf = translateAndMapModelObject(mo)) { |
| 257 |
4/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::DXCoilName, idf->name().get()); |
| 258 |
4/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::DXCoilObjectType, idf->iddObject().name()); |
| 259 |
3/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✗ Branch 8 not taken.
|
3 | if (mo.iddObjectType() == model::CoilWaterHeatingAirToWaterHeatPumpWrapped::iddObjectType()) { |
| 260 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idf->setString(Coil_WaterHeating_AirToWaterHeatPump_WrappedFields::EvaporatorAirInletNodeName, evapInletNodeName); |
| 261 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idf->setString(Coil_WaterHeating_AirToWaterHeatPump_WrappedFields::EvaporatorAirOutletNodeName, evapOutletNodeName); |
| 262 | } else { | ||
| 263 | ✗ | LOG(Error, modelObject.briefDescription() << " is attached to an unsupported type of coil: " << mo.briefDescription()); | |
| 264 | } | ||
| 265 | 3 | } | |
| 266 | 3 | } | |
| 267 | |||
| 268 | { | ||
| 269 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.minimumInletAirTemperatureforCompressorOperation(); |
| 270 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::MinimumInletAirTemperatureforCompressorOperation, value); |
| 271 | } | ||
| 272 | |||
| 273 | { | ||
| 274 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.maximumInletAirTemperatureforCompressorOperation(); |
| 275 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::MaximumInletAirTemperatureforCompressorOperation, value); |
| 276 | } | ||
| 277 | |||
| 278 | { | ||
| 279 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.compressorLocation(); |
| 280 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::CompressorLocation, value); |
| 281 | 3 | } | |
| 282 | |||
| 283 |
5/5✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 11 taken 1 time.
✓ Branch 12 taken 2 times.
|
9 | if (istringEqual("Schedule", modelObject.compressorLocation())) { |
| 284 |
2/3✓ Branch 1 taken 1 time.
✓ Branch 3 taken 1 time.
✗ Branch 4 not taken.
|
2 | if (auto schedule = modelObject.compressorAmbientTemperatureSchedule()) { |
| 285 |
3/4✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 6 taken 1 time.
✗ Branch 7 not taken.
|
2 | if (auto _schedule = translateAndMapModelObject(schedule.get())) { |
| 286 |
3/3✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
|
1 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::CompressorAmbientTemperatureScheduleName, _schedule->nameString()); |
| 287 | 1 | } | |
| 288 | 1 | } | |
| 289 | } | ||
| 290 | |||
| 291 | { | ||
| 292 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto mo = modelObject.fan(); |
| 293 |
2/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 3 times.
✗ Branch 4 not taken.
|
6 | if (auto idf = translateAndMapModelObject(mo)) { |
| 294 |
4/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::FanName, idf->name().get()); |
| 295 |
4/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::FanObjectType, idf->iddObject().name()); |
| 296 |
3/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✗ Branch 8 not taken.
|
3 | if (mo.iddObjectType() == IddObjectType::OS_Fan_OnOff) { |
| 297 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idf->setString(Fan_OnOffFields::AirInletNodeName, fanInletNodeName); |
| 298 |
2/2✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
|
3 | idf->setString(Fan_OnOffFields::AirOutletNodeName, fanOutletNodeName); |
| 299 | ✗ | } else if (mo.iddObjectType() == IddObjectType::OS_Fan_SystemModel) { | |
| 300 | ✗ | idf->setString(Fan_SystemModelFields::AirInletNodeName, fanInletNodeName); | |
| 301 | ✗ | idf->setString(Fan_SystemModelFields::AirOutletNodeName, fanOutletNodeName); | |
| 302 | } else { | ||
| 303 | ✗ | LOG(Error, modelObject.briefDescription() << " is attached to an unsupported type of fan: " << mo.briefDescription()); | |
| 304 | } | ||
| 305 | 3 | } | |
| 306 | 3 | } | |
| 307 | |||
| 308 | { | ||
| 309 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.onCycleParasiticElectricLoad(); |
| 310 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::OnCycleParasiticElectricLoad, value); |
| 311 | } | ||
| 312 | |||
| 313 | { | ||
| 314 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.offCycleParasiticElectricLoad(); |
| 315 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setDouble(WaterHeater_HeatPump_WrappedCondenserFields::OffCycleParasiticElectricLoad, value); |
| 316 | } | ||
| 317 | |||
| 318 | { | ||
| 319 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.parasiticHeatRejectionLocation(); |
| 320 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::ParasiticHeatRejectionLocation, value); |
| 321 | 3 | } | |
| 322 | |||
| 323 |
3/3✓ Branch 1 taken 3 times.
✓ Branch 3 taken 2 times.
✓ Branch 4 taken 1 time.
|
6 | if (auto schedule = modelObject.inletAirMixerSchedule()) { |
| 324 |
3/4✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 6 taken 2 times.
✗ Branch 7 not taken.
|
4 | if (auto _schedule = translateAndMapModelObject(schedule.get())) { |
| 325 |
3/3✓ Branch 1 taken 2 times.
✓ Branch 4 taken 2 times.
✓ Branch 7 taken 2 times.
|
2 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::InletAirMixerScheduleName, _schedule->nameString()); |
| 326 | 2 | } | |
| 327 | 3 | } | |
| 328 | |||
| 329 | { | ||
| 330 |
1/1✓ Branch 1 taken 3 times.
|
3 | auto value = modelObject.tankElementControlLogic(); |
| 331 |
3/4✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✗ Branch 7 not taken.
✓ Branch 8 taken 3 times.
|
6 | if (istringEqual(value, "MutuallyExlcusive")) { |
| 332 | ✗ | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankElementControlLogic, "MutuallyExclusive"); | |
| 333 | } else { | ||
| 334 |
1/1✓ Branch 1 taken 3 times.
|
3 | idfObject.setString(WaterHeater_HeatPump_WrappedCondenserFields::TankElementControlLogic, value); |
| 335 | } | ||
| 336 | 3 | } | |
| 337 | |||
| 338 |
1/1✓ Branch 1 taken 3 times.
|
6 | return idfObject; |
| 339 | 3 | } | |
| 340 | |||
| 341 | } // namespace energyplus | ||
| 342 | } // namespace openstudio | ||
| 343 |