GCC Code Coverage Report


Directory: ./
Coverage: low: ≥ 0% medium: ≥ 75.0% high: ≥ 90.0%
Coverage Exec / Excl / Total
Lines: 84.6% 104 / 0 / 123
Functions: 100.0% 1 / 0 / 1
Branches: 66.3% 171 / 0 / 258

src/energyplus/ForwardTranslator/ForwardTranslateZoneHVACEvaporativeCoolerUnit.cpp
Line Branch Exec Source
1 /***********************************************************************************************************************
2 * OpenStudio(R), Copyright (c) 2008-2023, Alliance for Energy Innovation, LLC, and other contributors. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
5 * following conditions are met:
6 *
7 * (1) Redistributions of source code must retain the above copyright notice, this list of conditions and the following
8 * disclaimer.
9 *
10 * (2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
11 * disclaimer in the documentation and/or other materials provided with the distribution.
12 *
13 * (3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse or promote products
14 * derived from this software without specific prior written permission from the respective party.
15 *
16 * (4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other derivative works
17 * may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar designation without specific prior
18 * written permission from Alliance for Energy Innovation, LLC.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
21 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
22 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE UNITED STATES GOVERNMENT, OR THE UNITED
23 * STATES DEPARTMENT OF ENERGY, NOR ANY OF THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
24 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
25 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 ***********************************************************************************************************************/
29
30 #include "../ForwardTranslator.hpp"
31 #include "../../model/Model.hpp"
32 #include "../../model/ZoneHVACEvaporativeCoolerUnit.hpp"
33 #include "../../model/ZoneHVACEvaporativeCoolerUnit_Impl.hpp"
34 #include "../../model/Schedule.hpp"
35 #include "../../model/Schedule_Impl.hpp"
36 #include "../../model/Node.hpp"
37 #include "../../model/Node_Impl.hpp"
38
39 #include <utilities/idd/ZoneHVAC_EvaporativeCoolerUnit_FieldEnums.hxx>
40 #include <utilities/idd/Fan_ComponentModel_FieldEnums.hxx>
41 #include <utilities/idd/Fan_ConstantVolume_FieldEnums.hxx>
42 #include <utilities/idd/Fan_OnOff_FieldEnums.hxx>
43 #include <utilities/idd/Fan_VariableVolume_FieldEnums.hxx>
44 #include <utilities/idd/Fan_SystemModel_FieldEnums.hxx>
45 #include <utilities/idd/EvaporativeCooler_Direct_ResearchSpecial_FieldEnums.hxx>
46 #include <utilities/idd/EvaporativeCooler_Indirect_ResearchSpecial_FieldEnums.hxx>
47 #include <utilities/idd/IddEnums.hxx>
48
49 using namespace openstudio::model;
50
51 namespace openstudio {
52
53 namespace energyplus {
54
55 5 boost::optional<IdfObject> ForwardTranslator::translateZoneHVACEvaporativeCoolerUnit(model::ZoneHVACEvaporativeCoolerUnit& modelObject) {
56
57 5 boost::optional<IdfObject> i_firstEvaporativeCooler_;
58 {
59
1/1
✓ Branch 1 taken 5 times.
5 HVACComponent firstEvaporativeCooler = modelObject.firstEvaporativeCooler();
60
1/1
✓ Branch 1 taken 5 times.
5 i_firstEvaporativeCooler_ = translateAndMapModelObject(firstEvaporativeCooler);
61
1/2
✗ Branch 1 not taken.
✓ Branch 2 taken 5 times.
5 if (!i_firstEvaporativeCooler_) {
62 ✗ LOG(Error, "ZoneHVACEvaporativeCoolerUnit '" << modelObject.nameString() << "', could not translate required First Evaporative Cooler:"
63 << firstEvaporativeCooler.briefDescription());
64 ✗ return boost::none;
65 }
66 5 }
67
68 5 boost::optional<IdfObject> i_fan_;
69 {
70
1/1
✓ Branch 1 taken 5 times.
5 HVACComponent supplyAirFan = modelObject.supplyAirFan();
71
1/1
✓ Branch 1 taken 5 times.
5 i_fan_ = translateAndMapModelObject(supplyAirFan);
72
1/2
✗ Branch 1 not taken.
✓ Branch 2 taken 5 times.
5 if (!i_fan_) {
73 ✗ LOG(Error, "ZoneHVACEvaporativeCoolerUnit '" << modelObject.nameString()
74 << "', could not translate required Supply Air Fan:" << supplyAirFan.briefDescription());
75 ✗ return boost::none;
76 }
77 5 }
78
79 // i_firstEvaporativeCooler_ and i_fan_ are always initialized now
80
81 // Instantiate an IdfObject of the class to store the values
82
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 IdfObject idfObject = createRegisterAndNameIdfObject(openstudio::IddObjectType::ZoneHVAC_EvaporativeCoolerUnit, modelObject);
83
84 // Availability Schedule Name: Required Object
85
1/1
✓ Branch 1 taken 5 times.
5 Schedule availabilitySchedule_ = modelObject.availabilitySchedule();
86
2/3
✓ Branch 1 taken 5 times.
✓ Branch 3 taken 5 times.
✗ Branch 4 not taken.
10 if (boost::optional<IdfObject> wo_ = translateAndMapModelObject(availabilitySchedule_)) {
87
3/3
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::AvailabilityScheduleName, wo_->nameString());
88 5 }
89
90
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 const auto outdoorAirInletNodeName = modelObject.nameString() + " Outdoor Air Node";
91 5 std::string coolerOutletNodeName;
92
93 // Outdoor Air Inlet Node Name: Required Node - This is an Outdoor Air Node
94 {
95
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 IdfObject oaNodeListIdf(openstudio::IddObjectType::OutdoorAir_NodeList);
96
1/1
✓ Branch 1 taken 5 times.
5 oaNodeListIdf.setString(0, outdoorAirInletNodeName);
97
1/1
✓ Branch 2 taken 5 times.
5 m_idfObjects.emplace_back(std::move(oaNodeListIdf));
98
1/1
✓ Branch 1 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::OutdoorAirInletNodeName, outdoorAirInletNodeName);
99 5 }
100
101 // Technically outletNode and inletNode are always initialized, since they are connected via addToThermalZone and this FT routine is called by
102 // thermalZone::equipment
103
104 // Cooler Outlet Node Name: Required Node, a zone air inlet node
105
2/3
✓ Branch 1 taken 5 times.
✓ Branch 3 taken 5 times.
✗ Branch 4 not taken.
10 if (boost::optional<Node> node = modelObject.outletNode()) {
106
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 coolerOutletNodeName = node->nameString();
107
3/3
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::CoolerOutletNodeName, node->nameString());
108 5 }
109
110 // Zone Relief Air Node Name: optional Node, filled to a Zone Exhaust Node if the flow is being balanced here and not elsewhere
111 // NOTE: we always assume the airflow is balanced
112
2/3
✓ Branch 1 taken 5 times.
✓ Branch 3 taken 5 times.
✗ Branch 4 not taken.
10 if (boost::optional<Node> node = modelObject.inletNode()) {
113
3/3
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::ZoneReliefAirNodeName, node->nameString());
114 5 }
115
116 // Supply Air Fan Object Type
117 // Supply Air Fan Name
118
4/4
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::SupplyAirFanObjectType, i_fan_->iddObject().name());
119
3/3
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::SupplyAirFanName, i_fan_->nameString());
120
121
3/3
✓ Branch 1 taken 5 times.
✓ Branch 3 taken 4 times.
✓ Branch 4 taken 1 time.
5 if (modelObject.isDesignSupplyAirFlowRateAutosized()) {
122
2/2
✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
8 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::DesignSupplyAirFlowRate, "Autosize");
123 } else {
124 // Design Supply Air Flow Rate: boost::optional<double>
125
3/3
✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
1 idfObject.setDouble(ZoneHVAC_EvaporativeCoolerUnitFields::DesignSupplyAirFlowRate, modelObject.designSupplyAirFlowRate().get());
126 }
127
128 // Fan Placement: Required String
129
1/1
✓ Branch 1 taken 5 times.
5 const std::string fanPlacement = modelObject.fanPlacement();
130
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 const bool blowThroughFan = istringEqual(fanPlacement, "BlowThrough");
131
1/1
✓ Branch 1 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::FanPlacement, fanPlacement);
132
133 // Cooler Unit Control Method: Required String
134
1/1
✓ Branch 1 taken 5 times.
5 const std::string coolerUnitControlMethod = modelObject.coolerUnitControlMethod();
135
1/1
✓ Branch 1 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::CoolerUnitControlMethod, coolerUnitControlMethod);
136
137 // Throttling Range Temperature Difference: Optional Double
138
1/1
✓ Branch 1 taken 5 times.
5 const double throttlingRangeTemperatureDifference = modelObject.throttlingRangeTemperatureDifference();
139
1/1
✓ Branch 1 taken 5 times.
5 idfObject.setDouble(ZoneHVAC_EvaporativeCoolerUnitFields::ThrottlingRangeTemperatureDifference, throttlingRangeTemperatureDifference);
140
141 // Cooling Load Control Threshold Heat Transfer Rate: Optional Double
142
1/1
✓ Branch 1 taken 5 times.
5 const double coolingLoadControlThresholdHeatTransferRate = modelObject.coolingLoadControlThresholdHeatTransferRate();
143
1/1
✓ Branch 1 taken 5 times.
5 idfObject.setDouble(ZoneHVAC_EvaporativeCoolerUnitFields::CoolingLoadControlThresholdHeatTransferRate,
144 coolingLoadControlThresholdHeatTransferRate);
145
146 // First Evaporative Cooler Object Type: Required String
147 // First Evaporative Cooler Object Name: Required Object
148
4/4
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::FirstEvaporativeCoolerObjectType, i_firstEvaporativeCooler_->iddObject().name());
149
3/3
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
5 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::FirstEvaporativeCoolerObjectName, i_firstEvaporativeCooler_->nameString());
150
151 // Second Evaporative Cooler Object Type: boost::optional<std::string>
152 // Second Evaporative Cooler Name: Optional Object
153 5 boost::optional<IdfObject> i_secondEvaporativeCooler_;
154
3/3
✓ Branch 1 taken 5 times.
✓ Branch 3 taken 3 times.
✓ Branch 4 taken 2 times.
10 if (boost::optional<HVACComponent> secondEvaporativeCooler_ = modelObject.secondEvaporativeCooler()) {
155
2/2
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
3 i_secondEvaporativeCooler_ = translateAndMapModelObject(*secondEvaporativeCooler_);
156
1/2
✓ Branch 0 taken 3 times.
✗ Branch 1 not taken.
3 if (i_secondEvaporativeCooler_) {
157
4/4
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
3 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::SecondEvaporativeCoolerObjectType, i_secondEvaporativeCooler_->iddObject().name());
158
3/3
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
3 idfObject.setString(ZoneHVAC_EvaporativeCoolerUnitFields::SecondEvaporativeCoolerName, i_secondEvaporativeCooler_->nameString());
159 }
160 5 }
161
162 // If BlowThrough: o---- Fan ---- E1 (---- E2) ----o
163 // If DrawThrough: o---- E1 (---- E2) ---- Fan ----o
164
1/1
✓ Branch 1 taken 5 times.
5 std::string baseName = modelObject.nameString();
165
166 // if (i_fan_) is always true
167 {
168 5 std::string inletNodeName;
169 5 std::string outletNodeName;
170
2/2
✓ Branch 0 taken 3 times.
✓ Branch 1 taken 2 times.
5 if (blowThroughFan) {
171
1/1
✓ Branch 1 taken 3 times.
3 inletNodeName = outdoorAirInletNodeName;
172
1/1
✓ Branch 1 taken 3 times.
3 outletNodeName = baseName + " Fan - First Evaporative Cooler Node";
173 } else {
174
2/2
✓ Branch 0 taken 1 time.
✓ Branch 1 taken 1 time.
2 if (i_secondEvaporativeCooler_) {
175
1/1
✓ Branch 1 taken 1 time.
1 inletNodeName = baseName + " Second Evaporative Cooler - Fan Node";
176 } else {
177
1/1
✓ Branch 1 taken 1 time.
1 inletNodeName = baseName + " First Evaporative Cooler - Fan Node";
178 }
179
1/1
✓ Branch 1 taken 2 times.
2 outletNodeName = coolerOutletNodeName;
180 }
181
182
5/6
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
✗ Branch 14 not taken.
✓ Branch 15 taken 5 times.
5 if (i_fan_->iddObject().type() == IddObjectType::Fan_ConstantVolume) {
183 ✗ i_fan_->setString(Fan_ConstantVolumeFields::AirInletNodeName, inletNodeName);
184 ✗ i_fan_->setString(Fan_ConstantVolumeFields::AirOutletNodeName, outletNodeName);
185
5/6
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
✗ Branch 14 not taken.
✓ Branch 15 taken 5 times.
5 } else if (i_fan_->iddObject().type() == IddObjectType::Fan_VariableVolume) {
186 ✗ i_fan_->setString(Fan_VariableVolumeFields::AirInletNodeName, inletNodeName);
187 ✗ i_fan_->setString(Fan_VariableVolumeFields::AirOutletNodeName, outletNodeName);
188
5/6
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
✗ Branch 14 not taken.
✓ Branch 15 taken 5 times.
5 } else if (i_fan_->iddObject().type() == IddObjectType::Fan_OnOff) {
189 ✗ i_fan_->setString(Fan_OnOffFields::AirInletNodeName, inletNodeName);
190 ✗ i_fan_->setString(Fan_OnOffFields::AirOutletNodeName, outletNodeName);
191
6/6
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
✓ Branch 14 taken 4 times.
✓ Branch 15 taken 1 time.
5 } else if (i_fan_->iddObject().type() == IddObjectType::Fan_SystemModel) {
192
2/2
✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
4 i_fan_->setString(Fan_SystemModelFields::AirInletNodeName, inletNodeName);
193
2/2
✓ Branch 1 taken 4 times.
✓ Branch 4 taken 4 times.
4 i_fan_->setString(Fan_SystemModelFields::AirOutletNodeName, outletNodeName);
194
5/6
✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
✓ Branch 7 taken 1 time.
✓ Branch 10 taken 1 time.
✓ Branch 14 taken 1 time.
✗ Branch 15 not taken.
1 } else if (i_fan_->iddObject().type() == IddObjectType::Fan_ComponentModel) {
195
2/2
✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
1 i_fan_->setString(Fan_ComponentModelFields::AirInletNodeName, inletNodeName);
196
2/2
✓ Branch 1 taken 1 time.
✓ Branch 4 taken 1 time.
1 i_fan_->setString(Fan_ComponentModelFields::AirOutletNodeName, outletNodeName);
197 }
198 5 }
199
200 // if (i_firstEvaporativeCooler_) is always true
201 {
202 5 std::string inletNodeName;
203 5 std::string outletNodeName;
204
2/2
✓ Branch 0 taken 3 times.
✓ Branch 1 taken 2 times.
5 if (blowThroughFan) {
205
1/1
✓ Branch 1 taken 3 times.
3 inletNodeName = baseName + " Fan - First Evaporative Cooler Node";
206
2/2
✓ Branch 0 taken 2 times.
✓ Branch 1 taken 1 time.
3 if (i_secondEvaporativeCooler_) {
207
1/1
✓ Branch 1 taken 2 times.
2 outletNodeName = baseName + " First Evaporative Cooler - Second Evaporative Cooler Node";
208 } else {
209
1/1
✓ Branch 1 taken 1 time.
1 outletNodeName = coolerOutletNodeName;
210 }
211 } else {
212
1/1
✓ Branch 1 taken 2 times.
2 inletNodeName = outdoorAirInletNodeName;
213
2/2
✓ Branch 0 taken 1 time.
✓ Branch 1 taken 1 time.
2 if (i_secondEvaporativeCooler_) {
214
1/1
✓ Branch 1 taken 1 time.
1 outletNodeName = baseName + " First Evaporative Cooler - Second Evaporative Cooler Node";
215 } else {
216
1/1
✓ Branch 1 taken 1 time.
1 outletNodeName = baseName + " First Evaporative Cooler - Fan Node";
217 }
218 }
219
220
5/6
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
✓ Branch 7 taken 5 times.
✓ Branch 10 taken 5 times.
✓ Branch 14 taken 5 times.
✗ Branch 15 not taken.
5 if (i_firstEvaporativeCooler_->iddObject().type() == IddObjectType::EvaporativeCooler_Direct_ResearchSpecial) {
221
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 i_firstEvaporativeCooler_->setString(EvaporativeCooler_Direct_ResearchSpecialFields::AirInletNodeName, inletNodeName);
222
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 i_firstEvaporativeCooler_->setString(EvaporativeCooler_Direct_ResearchSpecialFields::AirOutletNodeName, outletNodeName);
223
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 i_firstEvaporativeCooler_->setString(EvaporativeCooler_Direct_ResearchSpecialFields::SensorNodeName, coolerOutletNodeName);
224 ✗ } else if (i_firstEvaporativeCooler_->iddObject().type() == IddObjectType::EvaporativeCooler_Indirect_ResearchSpecial) {
225 ✗ i_firstEvaporativeCooler_->setString(EvaporativeCooler_Indirect_ResearchSpecialFields::PrimaryAirInletNodeName, inletNodeName);
226 ✗ i_firstEvaporativeCooler_->setString(EvaporativeCooler_Indirect_ResearchSpecialFields::PrimaryAirOutletNodeName, outletNodeName);
227 ✗ i_firstEvaporativeCooler_->setString(EvaporativeCooler_Indirect_ResearchSpecialFields::SensorNodeName, coolerOutletNodeName);
228 } else {
229 ✗ LOG(Warn, modelObject.briefDescription() << ": Contains an unsupported type " << i_firstEvaporativeCooler_->iddObject().type() << ".");
230 }
231 5 }
232
233
2/2
✓ Branch 0 taken 3 times.
✓ Branch 1 taken 2 times.
5 if (i_secondEvaporativeCooler_) {
234
1/1
✓ Branch 1 taken 3 times.
3 const std::string inletNodeName = baseName + " First Evaporative Cooler - Second Evaporative Cooler Node";
235 3 std::string outletNodeName;
236
2/2
✓ Branch 0 taken 2 times.
✓ Branch 1 taken 1 time.
3 if (blowThroughFan) {
237
1/1
✓ Branch 1 taken 2 times.
2 outletNodeName = coolerOutletNodeName;
238 } else {
239
1/1
✓ Branch 1 taken 1 time.
1 outletNodeName = baseName + " Second Evaporative Cooler - Fan Node";
240 }
241
242
5/6
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
✗ Branch 14 not taken.
✓ Branch 15 taken 3 times.
3 if (i_secondEvaporativeCooler_->iddObject().type() == IddObjectType::EvaporativeCooler_Direct_ResearchSpecial) {
243 ✗ i_secondEvaporativeCooler_->setString(EvaporativeCooler_Direct_ResearchSpecialFields::AirInletNodeName, inletNodeName);
244 ✗ i_secondEvaporativeCooler_->setString(EvaporativeCooler_Direct_ResearchSpecialFields::AirOutletNodeName, outletNodeName);
245 ✗ i_secondEvaporativeCooler_->setString(EvaporativeCooler_Direct_ResearchSpecialFields::SensorNodeName, coolerOutletNodeName);
246
5/6
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
✓ Branch 7 taken 3 times.
✓ Branch 10 taken 3 times.
✓ Branch 14 taken 3 times.
✗ Branch 15 not taken.
3 } else if (i_secondEvaporativeCooler_->iddObject().type() == IddObjectType::EvaporativeCooler_Indirect_ResearchSpecial) {
247
2/2
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
3 i_secondEvaporativeCooler_->setString(EvaporativeCooler_Indirect_ResearchSpecialFields::PrimaryAirInletNodeName, inletNodeName);
248
2/2
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
3 i_secondEvaporativeCooler_->setString(EvaporativeCooler_Indirect_ResearchSpecialFields::PrimaryAirOutletNodeName, outletNodeName);
249
2/2
✓ Branch 1 taken 3 times.
✓ Branch 4 taken 3 times.
3 i_secondEvaporativeCooler_->setString(EvaporativeCooler_Indirect_ResearchSpecialFields::SensorNodeName, coolerOutletNodeName);
250 } else {
251 ✗ LOG(Warn, modelObject.briefDescription() << ": Contains an unsupported type " << i_secondEvaporativeCooler_->iddObject().type() << ".");
252 }
253 3 }
254
255 // Shut Off Relative Humidity: boost::optional<double>
256
2/2
✓ Branch 1 taken 5 times.
✓ Branch 4 taken 5 times.
5 idfObject.setDouble(ZoneHVAC_EvaporativeCoolerUnitFields::ShutOffRelativeHumidity, modelObject.shutOffRelativeHumidity());
257
258
1/1
✓ Branch 1 taken 5 times.
5 return idfObject;
259 5 } // End of translate function
260
261 } // end namespace energyplus
262 } // end namespace openstudio
263